Sample Load Commands
Here is a simple load command with no option switches (if loaded from drive A):
load a:\netware\adpt160m.ham
If an error message appears when attempting to load the driver, refer to “Troubleshooting” on page 63.
Here is an example of the adpt160m.ham driver being loaded with command line options (if loaded from drive A):
load a:\netware\adpt160m.ham verbose=y slot=2
Using NetWare and the Host Adapter
This section contains useful information on using NetWare and your host adapter.
Using Removable Media
The adpt160m.ham driver module fully supports
•The driver only recognizes and registers media with 512 bytes/sector.
•NetWare allows you to mount/dismount the media, and to lock/unlock the media.
NetWare’s monitor.nlm program supports several
1.Load monitor.nlm to display the various options.
2.Select Disk Information. All system disk drives appear.
3.Select the
59