Please enter the names of the packages you wish to install, or q to quit:
c At this point, type ad160 and press Enter. The screen then displays this mes- sage and various installation status prompts:
Installing adl60
When the driver is loaded, the following message appears, indicating that the adl60 driver has been loaded into the Link Kit for kernel addition:
Installed adl60
#
3 Modify the mscsi file, if necessary, to change your primary host bus adapter to an Ultra3 SCSI host bus adapter, using the procedure below:
a Enter the following command:
cd /etc/conf/cf.d
b Use a text editor to edit this file. Enter the following command if using the vi editor:
vi mscsi
c Search for all entries with the host bus adapter number 0 (zero). The host bus adapter number is the third column in each entry. For example:
Host | SCSI | Host | Target | Logical | Bus1 |
Adapter | Device | Adapter | ID | Unit |
|
Prefix | Type | Number |
| Number |
|
|
|
|
|
|
|
xx | Stp | 0 | 2 | 0 | 0 |
xx | Sdsk | 0 | 0 | 0 | 0 |
xx | Srom | 0 | 5 | 0 | 0 |
1This field applies to SCO OpenServer 5 and later.
71