HP Book 800CT manual Memory test responses, Cache test responses, VGA test responses

Comparison	"FBLD/FBSTP", "FILD/FIST","FLD/FST","FXCH" -- "FAILED"
	"FCOM","FICOM","FTST","FXAM" -- "FAILED"
	"FUCOM" -- "FAILED"
Trigonometry	"F2XM1","FPATAN","FPTAN","FYL2X","FYL2XP1" -- "FAILED"
	"FCOS","FSIN","FSINCOS" -- "FAILED"
Memory test responses
Suspend RAM test	"Failed: memory manager loaded"
Extended Pattern And	"Could not allocate buffer"
Address Test	"BIOS reports no extended memory available"
	"Error at address XXXXXXXXH"
	"Parity Error at blocks XXXXXXXH-YYYYYYYYH"
	"Parity Error at blocks XXXXXXXH-YYYYYYYYH"
	"Test aborted at block XXXXXXXH"
Base/UMB Pattern And	"Error at memory paragraph XXXXH"
Address Test	"Parity Error at paragraphs XXXXH-YYYYH"
	"Test aborted at paragraph XXXXH"
Base/UMB Bus Throughput	"Error at segment XXXXH"
Test	"Bus Throughput Test aborted at segment XXXXH"
EMS Bus Throughput Test	"Not Enough EMS Memory Available!"
	"Could Not Allocate EMS Memory!"
	"Error at segment XXXXH"
	"Could Not Establish EMS Page Frame Location!"
EMS Pattern And Address	"Error on page XXXXX"
Test	"Parity Error on page XXXXX"
	"Test aborted at EMS page XXXXX"
Code Test	"BIOS reports no extended memory available"
	“PC-DOCTOR encountered an unexpected exception while code-
	testing memory in protected mode. System halted (this error is
	unrecoverable).'”
Cache test responses

Cache Test

“Error at memory block XXXXXXXH”

“Parity Error at blocks XXXXXXH-YYYYYYYH” “Test aborted at block XXXXXXXXH”

VGA test responses

Video Pages	"Aborted at mode XXXH (III)"
	"Mode XXXH (III) page Y failed"
Video Memory	"Pattern Error in mode XXXH (III) plane Y, bits XXXXH Failed"
	"Pattern Error in mode XXXH (III) bits XXXXH Failed"
Color Registers	"Could not initialize mode 13H"
	"DAC-register N " -- "Red ", "Green ", "Blue " -- "FAILED"
VGA Controller Registers	"Video RAM Enable" -- "FAILED"
	"Video IRQ" -- "FAILED"
	"Map Mask Register" -- "FAILED"
	"Set/Reset Register" -- "FAILED"
	"Enable Set/Reset Register" -- "FAILED"
	"Color Compare Register" -- "FAILED"
	"Data Rotate Register" -- "FAILED"
	"Read Map Select Register" -- "FAILED"

91