HP Book 800CT manual Hard Disk Drive, Hard Drive Screws

Hard Disk Drive

(End User Replaceable)

Required Equipment

∙Torx #6 screwdriver

Removal Procedure

1.Exit all applications, including Windows.

2.Turn the OmniBook off and remove the battery and ac adapter.

3.Use a Torx-T6 screwdriver to remove the two keyboard screws and the three hard drive screws (the exact location of the hard drive screws vary with the manufacturer of hard drive). See Figure 19.

Hard Drive Screws M3.0x0.5x5.0mm 1.5 - 3.5 in-lb (p/n 0515-2847)

Keyboard Screws M2.0x0.4x7.0mm 1.5-3.5 in-lb (p/n 0515-2846)

Figure 19 - Hard Drive Screws

4.Turn the OmniBook over and open the cover. Grasp the top edge of the Keyboard and fold out gently. Note – the Keyboard Flex Cables do not need to be disconnected. See Figure 20 on page 54.

CAUTION: To avoid damage due to keyboard flex cables, do not pull the cables out of the connectors or pick up the OmniBook while the keyboard is still connected.

53