TIP: You can also charge the battery by connecting your HP iPAQ to a USB port on your computer using the
NOTE: Whenever a replacement battery is inserted into your HP iPAQ, press the End key for at least two seconds. In case the device does not switch on, attach an AC adapter to switch on your HP iPAQ.
Step 4: Turn on your HP iPAQ
Press the Power button or End key to turn on your HP iPAQ. Next, follow the instructions on the screen to complete the setup. Use the keypad to enter information.
Protecting Your HP iPAQ with a Password
You can secure the data on your HP iPAQ by setting a password. Each time you turn on your HP iPAQ, you will be prompted to enter the password.
To set a password:
1.Press Start > Settings > Security > Device Lock.
2.Select the Prompt if device unused for check box, and select the time that your HP iPAQ must be unused before you are prompted for a password.
3.In the Password type box, select the type of password you would like to use. Enter the password and then confirm the password.
4.Press Done.
The next time your HP iPAQ is unused for the specified period of time, you are prompted to enter your password.
TIP: Use the same steps as above to change or reset your password.
Finding the Serial and Model Number
Locate the serial and model number of your HP iPAQ before contacting HP Customer Support, particularly if you are calling for
View the serial and model ID by pressing Start > More > HP Help and Support > Serial and Model Number.
You can also find this information below the battery of your HP iPAQ:
To locate the serial and model number:
1.Remove the battery cover.
2.Remove the battery from the unit.
3.Locate the label containing the product ID and serial number underneath the battery.
Status Icons
The following table lists the common status indicators and their meanings.
8 Chapter 4 Setting Up Your HP iPAQ