13 Storage Cards
Using Storage Cards
Use optional storage cards for:
●Expanding the memory of your HP iPAQ
●Adding functionality
NOTE: Storage cards must be purchased separately and are not included with your HP iPAQ. To locate information about storage cards, visit http://www.hp.com/accessories/ipaq.
Inserting a Storage Card
To insert a storage card into the storage slot on the HP iPAQ:
1.Locate the storage card slot on the side of your HP iPAQ.
2.Open the protective cover.
3.Insert the storage card into the storage card slot and push the connection edge of the card firmly into the storage card slot.
NOTE: If your storage card is not recognized, follow the card manufacturer's instructions to install it. If you have trouble inserting a storage card, try the following:
●Make sure the label is facing down.
●Make sure you are not inserting the card at an angle.
●Make sure you insert the connection area (the metal area) first.
Removing a Storage Card
To remove a Micro Secure Digital
1.Close all programs that are using the storage card.
2.Remove the card from the storage card slot by lightly pushing on the card to unlock it.
3.When the card disengages and pops out, pull it from the storage card slot.
Viewing Content of a Storage Card
Use File Explorer to view the files that are located on your optional storage card.
1.Press Start > File Manager.
2.Navigate to select the Memory Card folder to see a list of files and folders.
64 Chapter 13 Storage Cards