Step 2: Install the battery and replace the battery cover
1.Align the battery connectors on the battery with the housing pins in the battery compartment, and insert the battery.
2.Place the battery cover down and slide up until it clicks into place.
Step 3: Charge the battery
CAUTION: To avoid damaging your HP iPAQ or the AC adapter, Make sure all connectors are properly aligned before connecting.
The battery provides power for your HP iPAQ to operate. Your HP iPAQ comes with a
It takes approximately
1.Insert the USB end of the
2.Connect the AC adapter to an electrical outlet.
3.Connect the
HP iPAQ. The cable connector only fits one way. If the connector does not insert easily, turn it over.
Step 2: Install the battery and replace the battery cover | 7 |