Bowflex TC3000 Installing the Uprights, Installing the Upright Junction Covers and Cosmetic Plugs

Assembly Guide

Step 6: INSTALLING THE UPRIGHTS

Locate the following for this step:

PARTS:

•TreadClimber® Base & Treadle Assembly from Step 5.

•One (1) Left Upright Support & Hydraulic Cylinder

•One (1) Right Upright Support & Hydraulic Cylinder

HARDWARE:

• Two (2) 5/16” x 1” Button Head Screws

6-1On the base assembly screw a 5/16" x 1" button head screw half way in on the outside of both the right and left lower upright bracket (see Figure 6-1).

6-2Place the left upright onto the left upright bracket (see Figure 6-2), so it rests on the button head screw (see Figure 6-3). Make sure the cylinder bracket is at the top and pointing to rear.

6-3Repeat this process on the right side.

Figure 6-1

Figure 6-2

Figure 6-3

Step 7: INSTALLING THE UPRIGHT JUNCTION COVERS AND COSMETIC PLUGS

Locate the following for this step:

PARTS:

•TreadClimber® Base & Treadle Assembly from Step 6.

•Two (2) Plastic Upright Junction Covers

HARDWARE:

• Four (4) Cosmetic Plugs

7-1Place the plastic upright junction covers onto the top of left upright support (see Figure 7-1).

7-2Insert the cosmetic plugs (2 per side) into the holes on the top, inside and outside of the left upright support (see Figure 7-2).

7-3Repeat this process on the right side.

Figure 7-1

Figure 7-2

17 Bowflex® TreadClimber® Owner’s Manual