Assembly Guide

19-7Release the POWER and SLOWER buttons. The TIME display will read “CAL”, “PrSS”, “Strt”.

19-8Press the START/STOP button. This will start the calibration procedure.

19-9During the calibration procedure, the belts will start and stop and the displays will show various numbers that relate to calibration—DO

NOT INTERRUPT CALIBRATION.

19-10When calibration has completed “CAL” “PASS” will show in the TIME display.

19-11Remove and re-insert the Safety Key to clear the displays.

When the Bowflex® TreadClimber® exercise machine has completed calibration, you may begin your workout.

Note: During calibration 100 ft LED on TC5000 signifies belt speed sensor, 1000 ft LED is step sensor. During calibration, some models of the TC3000 will show the step sensor in the DISTANCE window as a heart and the speed sensor in the SPEED window as a heart.

Explanation of Calibration Display Messages (for information only):

During calibration, the TIME display will show you text messages updating you as to the status of calibration. When there is no text message in the TIME display window, the other displays will show the following:

HEART RATE (TC5000 Only) – will show the status of the motor control relay.

“ON” signifies the power relay is on and energizing the motor.

“OFF” signifies the motor control relay is off and not energizing the motor.

CALORIES/CAL PER MIN – will show the version number of the software.

TIME – will show either a text message regarding auto-calibration (“d0nE”, “Strt”, etc.) or the actual Pulse Width Modulation (PWM) number (a number that provides digital information about base unit functions to the console) if START/STOP, FASTER or SLOWER is pressed during calibration.

MILES/TOTAL STEPS (DISTANCE/MILES for TC3000) – will show the calibration of the total step count.

SPEED – will display the actual belt speed during the calibration function.

25

Bowflex® TreadClimber® Owner’s Manual

Page 28
Image 28
Bowflex TC1000, TC5000, TC3000 manual Not Interrupt Calibration