Technical Data
Category
Maximum Working Fluid Pressure
Maximum Working Air Pressure
Minimum Air Pressure at Gun Inlet
Maximum Fluid Operating Temperature
Short Circuit Current Output
Voltage Output Energy
Sound Power (measured per ISO Standard 9216)
Sound Pressure (measured 1 m from gun)
Gun Air Inlet Fitting,
Gun Fluid Inlet Fitting
Gun Weight
Gun Length
Isolation Enclosure Air Inlet Fitting
Isolation Enclosure Fluid Inlet Fitting
Isolation Enclosure Weight
Isolation Enclosure Height
Isolation Enclosure Width
Isolation Enclosure Depth
Wetted Parts
Technical Data
Data
100 psi (0.7 MPa, 7 bar)
100 psi (0.7 MPa, 7 bar)
40 psi (0.28 MPa, 2.8 bar)
120°F (48°C)
125 microamperes
.35 J with fluid hose 246431 installed 244581, 245301: 60 kV
244582, 245305:
at 40 psi (0.28 MPa, 2.8 bar): 90.4 dB(A)
at 100 psi (0.7 MPa, 7 bar): 105.4 dB(A)
at 40 psi (0.28 MPa, 2.8 bar): 87 dB(A)
at 100 psi (0.7 MPa, 7 bar): 99 dB(A) 1/4 npsm(m)
custom inlet for Graco waterborne fluid hose
27.8oz (788 g)
11.1in. (28.2 cm) 1/4 npt
3/8 in. OD tube fitting 125 lb (56.3 kg)
44 in. (1118 mm)
24 in. (610 mm)
29 in. (737 mm)
Gun: Stainless Steel; Nylon, Acetal,
Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten
Wire, Polyethylene
Waterborne Fluid Hose: PTFE
Suction Tube: Polyethylene, Stainless Steel
Triton Pump: See manual 309303
Loctite® is a registered trademark of the Loctite Corporation.
309293J | 69 |