Toshiba RAV-SP240CT-UL External view, Removal of side panel, Removal of protective vinyl

Page 8

3 Removal of side panel

Under Ceiling Type

Installation Manual

3 Removal of side panel

After removing the side panel fixing screws (1 each at right and left), slide the side panel forward and then remove it.

Protector

Side panel

Level louver

Slide forward.

4 Removal of protective vinyl

Peel out the protective vinyl on the level louver.

5 Removal of protector

Remove the protector (1 pcs.) of the fan. (RAV-SP240CT only)

External view

REQUIREMENT

Strictly comply with the following rules to prevent damage of the indoor units and human injury.

•Do not put a heavy article on the indoor unit. (Even units are packaged)

•Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit unpacked by necessity, be sure to use buffering cloth, etc. to not damage the unit.

•Do not apply force to the other parts (refrigerant pipe, drain pan, foamed parts, or resin parts, etc.).

•Carry the package by two or more persons, and do not bundle it with plastic band at positions other than specified.

7-EN

– 7 –

Image 8

Contents AIR CONDITIONER SPLIT TYPE RAV-SP180CT-UL RAV-SP240CT-UL RAV-SP300CT-ULRAV-SP360CT-UL RAV-SP420CT-UL EnglishContents ADOPTION OF NEW REFRIGERANTUnder Ceiling Type 1 ACCESSORY PARTS„Accessory parts 2 PRECAUTIONS FOR SAFETY Under Ceiling TypeUnder Ceiling Type 3 SELECTION OF INSTALLATION PLACE „Installation space„Height of ceiling Avoid installing in the following places„Wireless remote control „Before installation2 Removing wire guard Under Ceiling TypeInstallation Manual„External view 3 Removal of side panel4 Removal of protective vinyl 5 Removal of protectorInstallation Manual Unit in mm Under Ceiling Type„Installation of hanging bolts „Draw-outdirection of pipe/ wire„Pipe knockout hole Using attached installation pattern„Installation of indoor unit „Installation of remote control Sold separatelyInstallation Manual There is ceiling material4 REFRIGERANT PIPING AND EVACUATING „Refrigerant Piping„Pipe size „Permissible Piping Length and Height Difference„Evacuation Tightening connectionRefrigerant amount to be added Piping with outdoor unitREQUIREMENT Thermal insulation processUnder Ceiling Type 5 DRAIN PIPING WORK „Piping/Heat insulating material„Drain up Under Ceiling Type„Connection of drain hose „Thermal insulating process„Connection of drain pipe Under Ceiling Type6 ELECTRICAL CONNECTION Remote control wiringWiring Under Ceiling TypeUnder Ceiling Type REQUIREMENT „Wire connectionUnder Ceiling Type Connected at backside Connected at upsideUnder Ceiling Type 19-EN„System interconnection Wires and Ground Wire „Remote Control Wiring„Wiring Diagram Single system„Changing applicable control setting 7 APPLICABLE CONTROLSProcedure Procedure„Installation to high ceiling „Using wireless remote control1 → 2 → 3 → 4 → 5 → Procedure„Filter sign setting „To secure better effect of heating„Group control Procedure exampleProcedure ProcedureProcedure ProcedureProcedure ProcedureProcedure ProcedureUnder Ceiling Type „Remote control switch monitoring functionInstallation Manual 8 TEST RUN 2, 4 1,5„Before test run „Execute a test runWireless remote control ProcedureProcedure Procedure9 TROUBLESHOOTING „Confirmation of error history„Confirmation and check Procedure30-EN „Check codes and parts to be checkedUnder Ceiling Type Under Ceiling Type 31-ENUnder Ceiling Type 32-ENEH99864801