HP DC5100 manual Device Options NIC PXE, Option ROM Download to, Onboard Devices

		POST Error Messages
Numeric Codes and Text Messages (Continued)
Code/Message	Probable Cause	Recommended Action
110-Out of Memory	Recently added PCI	1. If a PCI expansion card was recently
Space for Option	expansion card contains	added, remove it to see if the problem
ROMs	an option ROM too large	remains.
	to download during	2. In Computer Setup, set Advanced >
	POST.
		Device Options > NIC PXE
		Option ROM Download to
		DISABLE to prevent PXE option ROM
		for the internal NIC from being
		downloaded during POST to free
		more memory for an expansion card's
		option ROM. Internal PXE option
		ROM is used for booting from the NIC
		to a PXE server.
		3. Enable the ACPI/USB Buffers @ Top
		of Memory setting in Computer Setup.
150-SafePost Active	A PCI expansion card is	1. Restart the computer.
	not responding.	2. Disable SafePost.
		3. If the expansion card does not
		respond, replace the card.
162-System Options	Configuration incorrect.	Run Computer Setup and check the
Not Set	RTC (real-time clock)	configuration in Advanced >
	battery may need to	Onboard Devices.
	be replaced.	Reset the date and time under Control
		Panel. If the problem persists, replace the

RTC battery. See the Hardware Reference Guide on the Documentation CD for instructions on installing a new battery, or contact an authorized dealer or reseller for RTC battery replacement.

Troubleshooting Guide www.hp.com A–3