York YCAL0065, YCAL0041 manual Design Parameters, English Ycal, SI Units Ycal

Design Parameters

FORM 150.64-EG1

ENGLISH

YCAL	LEAVING WATER		COOLER FLOW (GPM)		AIR ON CONDENSER (°F)
	TEMPERATURE (°F)
	MIN	MAX	MIN	MAX	MIN	MAX
0041	40	55	40	200	0	125
0045	40	55	40	200	0	125
0051	40	55	40	200	0	125
0055	40	55	60	300	0	125
0061	40	55	60	300	0	125
0065	40	55	60	300	0	125
			SI UNITS
YCAL	LEAVING WATER		COOLER FLOW (L/S)		AIR ON CONDENSER (°C)
	TEMPERATURE (°DC)
	MIN	MAX	MIN	MAX	MIN	MAX
0041	4.4	12.8	2.5	12.6	-17.7	51.7
0045	4.4	12.8	2.5	12.6	-17.7	51.7
0051	4.4	12.8	2.5	12.6	-17.7	51.7
0055	4.4	12.8	3.8	18.9	-17.7	51.7
0061	4.4	12.8	3.8	18.9	-17.7	51.7
0065	4.4	12.8	3.8	18.9	-17.7	51.7

NOTES:

1.For leaving brine temperature below 40°F (4.4°C), contact your nearest YORK Office for application requirements.

2.For leaving water temperature higher than 55°F (12.8°C), contact the nearest YORK Office for application guidelines.

3.The evaporator is protected against freezing to -20°F (-28.8°C) with an electric heater as standard.

4.For operation at temperatures below 25°F (-3.9°C), the optional Low Ambient Kit will need to be installed on the system (for YCAL0041-0065 models only).

5.For operation at temperatures above 115°F (46.1°C), the optional High Ambient Kit will need to be installed on the system.

YORK INTERNATIONAL 13