York YCAL0041, YCAL0065 Dimensions YCAL0045 SI, 0045 1503.5 1105.5 Copper, 0045 1605.9 1109.7

Dimensions - YCAL0045 (SI)

171
82	22 TYP.

100

VIEW B-B

BOTTOM OF PANEL

1213

LIQUID IN

ELECTRICAL ACCESS

PANEL

1192

879

	252
	401
LIQUID OUT	76 VICTAULIC (typ)
	321
	1146

2292 BASE WIDTH

LEFT END

Aluminum

YCAL	Center of Gravity (in.)
	X	Y
0045	1503.5	1105.5

	Copper
YCAL	Center of Gravity (in.)
	X	Y
0045	1605.9	1109.7

NOTE: All dimensions are in mm unless specified otherwise.

NOTE:

Placement on a level surface of free of obstructions (including snow, for winter operation) or air circulation ensures rated performance, reliable operation, and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable airflow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high-pressure safety cutouts; however, the system designer must consider potential performance degradation. Recommended minimum clearances: front to wall – 2m; rear to wall – 2m; cooler end to wall – 1.2m; coil end to wall - 2m; top – no obstructions allowed; distance between adjacent units – 3m. No more than one adjacent wall may be higher than the unit. 1" nominal deflection isolators (not shown) will increase overall unit height by 152mm.

48 YORK INTERNATIONAL