Use the copy features
Chapter 6
(continued) |
|
Paper type | Control panel setting |
Other inkjet paper | Plain |
Plain Hagaki (Japan only) | Plain |
Glossy Hagaki (Japan only) | Photo |
L (Japan only) | Photo |
Increase copy speed or quality
The HP
●Fast (one star): copies faster than the Normal setting. The text is comparable to the quality of the Normal setting, but the graphics might be lower quality. The Fast setting uses less ink and extends the life of your print cartridges.
Note Fast is not available when the paper type is set to Photo.
●Normal (two stars): delivers
●Best (three stars): produces the highest quality for all paper and eliminates the banding (striping) effect that sometimes occurs in solid areas. Best copies slower than the other quality settings.
To change the copy quality from the control panel
1.Make sure you have paper loaded in the paper tray.
2.Load your original face down on the right front corner of the glass.
3.Press the Quality button to select fast (one star), normal (two stars), or best (three stars).
4.Press Start Copy Black or Start Copy Color.
Make multiple copies of the same original
You can set the number of copies from the control panel or from the HP Image Zone software.
To make multiple copies of an original from the control panel
1.Make sure you have paper loaded in the paper tray.
2.Load your original face down on the right front corner of the glass.
3.Press the Copies button to increase the number of copies up to a maximum of 9.
Tip Use the HP Image Zone software to set the number of copies higher than 9. If the number of copies is greater than 9, only the last digit of the number of copies is displayed on the control panel.
4.Press Start Copy Black or Start Copy Color.
In this example, the HP
24 | HP PSC 1500 |