
6.To reinstall the software, insert the HP
7.After the software is installed, connect the HP
8.Press the On button to turn the HP
After connecting and turning on your HP
9.Follow the onscreen instructions.
When the software installation is complete, the Status Monitor icon appears in the Windows system tray.
To verify that the software is properly installed,
To uninstall from a Windows computer, method 2
Note Use this method if Uninstall Software is not available in the Windows Start menu.
1.On the Windows taskbar, click Start, Settings, Control Panel.
2.
3.Select HP PSC & OfficeJet 4.5, and then click Change/Remove. Follow the onscreen instructions.
4.Disconnect your HP
5.Restart your computer.
Note It is important that you disconnect your HP
6.Launch setup.
7.Follow the onscreen instructions and the instructions provided in the Setup Guide that came with your HP
To uninstall from a Windows computer, method 3
Note This is an alternate method if Uninstall Software is not available in the Windows Start menu.
1.Run the HP PSC 1500
2.Select Uninstall and follow the onscreen directions.
3.Disconnect your HP
4.Restart your computer.
Note It is important that you disconnect your HP
5.Run the HP PSC 1500
Troubleshooting information
User Guide | 61 |