HP C6380, C6340, C6350 manual Chapter

Page 6

Chapter 1

2.Connect the Ethernet cable to the Ethernet port on the back of the product.

3.Connect the other end of the Ethernet cable to an available port on your Ethernet router or switch.

Network setup

4.Once you have connected the product to the network, install the software.

Set up the HP All-in-One on an integrated wireless (WLAN 802.11) network

The HP All-in-One uses an internal networking component that supports a wireless network.

For optimal performance and security in your wireless network, HP recommends you use a wireless router or access point (802.11) to connect the product and the other network elements. When network elements are connected through a wireless router or access point, this is called an infrastructure network.

4 Network setup

Image 6

Contents Basics Guide Hewlett-Packard Company notices Contents Network setup Set up the HP All-in-One on a wired Ethernet networkWhat you need for a wired network Connect the HP All-in-One to the networkTo connect the product to the network Chapter What you need for an integrated wireless Wlan 802.11 network Connect to an integrated wireless Wlan 802.11 networkTo connect the product with the Wireless Setup Wizard If you do not see your network name in the listSet up the HP All-in-One using an ad hoc wireless connection What you need for an ad hoc network To create a network profileCreate a network profile for other operating systems Connect to a wireless ad hoc network Communication mode ad hoc Encryption enabledTo connect to a wireless ad hoc network Install the software for a network connection To install the Windows HP Photosmart SoftwareTo change a USB connection to a wired Ethernet connection Connect to additional computers on a networkConfigure your firewall to work with HP products This runs the Wireless Setup WizardManage your network settings Print network settingsAdvanced firewall information Print the wireless network test Restore network defaultsTurn the wireless radio on and off Wireless Network Test printsHP All-in-One overview HP All-in-One at a glanceControl panel features Label Icon Name and DescriptionFind more information Start Here guideOnscreen Help Load paper HP Web siteTo load full-size paper Chapter Avoid paper jams Print a photo on photo paper To print photos Scan an imageMake a copy Press Print PhotosPress Start Copy Black or Start Copy Color to begin copying Replace the ink cartridgesTo make a copy from the control panel To replace the ink cartridgesReplace the ink cartridges One overview Uninstall and reinstall the software Troubleshooting common setup issuesTo uninstall and reinstall the software Setup troubleshooting Solution 2 Set your product as the default printer After setting up the product, it does not printSolution 1 Press the On button to turn on the product Solution 5 Load paper in the input trayTo run the Network Diagnostic tool Network troubleshootingWireless Network Test prints To check a wired Ethernet connectionTo check a wireless connection To print the Network Configuration Page a. Press SetupMake sure the product is on the network To access the HP Photosmart C6300 All-in-One series home Make sure the product is online and readyNetwork Status Clear paper jams Make sure the HP Network Devices Support service is runningTo restart the HP Network Device Support service To check the printer statusIf you have a problem, follow these steps Information on ink cartridges and the printheadSupport process Product specifications System requirementsRegulatory notices Warranty Technical informationXHPERXUJUDQDLV

Related manuals

Manual 16 pages 43.7 Kb

Manual 331 pages 38.76 Kb