HP C6350, C6380, C6340 manual Connect to additional computers on a network

Page 14

Network setup

Chapter 1

4.On the Connection Type screen, select Through the network, and then click Next.

The Searching screen appears as the Setup program searches for the product on the network.

5.On the Printer Found screen, verify that the printer description is correct.

If more than one printer is found on the network, the Printers Found screen appears. Select the product you want to connect.

6.Follow the prompts to install the software.

When you have finished installing the software, the product is ready for use.

7.If you disabled any virus detection software on your computer, make sure to enable it again.

8.To test your network connection, go to your computer and print a self-test report to the product.

Connect to additional computers on a network

You can connect the HP All-in-One to a small number of computers on a network. If the HP All-in-One is already connected to a computer on a network, for each additional computer you must install the HP All-in-One software. During installation of a wireless connection, the software will discover the product on the network. Once you have set up the HP All-in-One on the network you will not need to configure it again when you add additional computers.

NOTE: You can connect the HP All-in-One to either a wireless or wired network, but not both at the same time.

Change the HP All-in-One from a USB connection to a network connection

If you first install the HP All-in-One with a USB connection, you can later change to either a wireless or Ethernet network connection. If you already understand how to connect to a network, you can use the general directions below.

NOTE: For optimal performance and security in your wireless network, use an access point (such as a wireless router) to connect the HP All-in-One.

To change a USB connection to a wired (Ethernet) connection

1.Unplug the USB connection from the back of the product.

2.Connect an Ethernet cable from the Ethernet port on the back of the product to an available Ethernet port on the router or switch.

3.Install the software for a network connection, choose Add a product, and then choose Through the network.

4.When the installation is complete, open Printers and Faxes (or Printers) in the Control Panel and delete the printers from the previous USB installation.

To change a USB connection to an integrated wireless WLAN 802.11 connection

1.Unplug the USB connection from the back of the product.

2.Press Setup.

12 Network setup

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Basics Guide Hewlett-Packard Company notices Contents Network setup Set up the HP All-in-One on a wired Ethernet networkTo connect the product to the network What you need for a wired networkConnect the HP All-in-One to the network Chapter What you need for an integrated wireless Wlan 802.11 network Connect to an integrated wireless Wlan 802.11 networkTo connect the product with the Wireless Setup Wizard If you do not see your network name in the listSet up the HP All-in-One using an ad hoc wireless connection What you need for an ad hoc network To create a network profileCreate a network profile for other operating systems To connect to a wireless ad hoc network Connect to a wireless ad hoc networkCommunication mode ad hoc Encryption enabled Install the software for a network connection To install the Windows HP Photosmart SoftwareTo change a USB connection to a wired Ethernet connection Connect to additional computers on a networkConfigure your firewall to work with HP products This runs the Wireless Setup WizardAdvanced firewall information Manage your network settingsPrint network settings Print the wireless network test Restore network defaultsTurn the wireless radio on and off Wireless Network Test printsHP All-in-One overview HP All-in-One at a glanceControl panel features Label Icon Name and DescriptionOnscreen Help Find more informationStart Here guide To load full-size paper Load paperHP Web site Chapter Avoid paper jams Print a photo on photo paper To print photos Scan an imageMake a copy Press Print PhotosPress Start Copy Black or Start Copy Color to begin copying Replace the ink cartridgesTo make a copy from the control panel To replace the ink cartridgesReplace the ink cartridges One overview To uninstall and reinstall the software Uninstall and reinstall the softwareTroubleshooting common setup issues Setup troubleshooting Solution 2 Set your product as the default printer After setting up the product, it does not printSolution 1 Press the On button to turn on the product Solution 5 Load paper in the input trayTo run the Network Diagnostic tool Network troubleshootingWireless Network Test prints To check a wired Ethernet connectionMake sure the product is on the network To check a wireless connectionTo print the Network Configuration Page a. Press Setup Network Status To access the HP Photosmart C6300 All-in-One series homeMake sure the product is online and ready Clear paper jams Make sure the HP Network Devices Support service is runningTo restart the HP Network Device Support service To check the printer statusSupport process If you have a problem, follow these stepsInformation on ink cartridges and the printhead Regulatory notices Product specificationsSystem requirements Warranty Technical informationXHPERXUJ UDQDLV
Related manuals
Manual 16 pages 43.7 Kb Manual 331 pages 38.76 Kb
Top Page Image Contents