HP C6350, C6380, C6340 manual Restore network defaults, Turn the wireless radio on and off

Page 17

Restore network defaults

You can reset the network settings to what they were when you purchased the HP All-in- One.

1.Press Setup.

2.Press the down arrow button until Network is highlighted, and then press OK.

3.Press the down arrow button until Restore Network Defaults is highlighted, and then press OK.

4.Press OK to confirm that you want to restore the network defaults.

Turn the wireless radio on and off

The wireless radio is off by default, but when you install the software and connect the HP All-in-One to the network, the wireless radio is turned on automatically. The blue light on the front of the HP All-in-One indicates that the wireless radio is on. In order to stay connected to a wireless network, the radio must stay on. However, if the HP All-in-One is connected directly to a computer with a USB connection, the radio is not used. In this case you might want to turn the radio off.

1.Press Setup.

2.Press the down arrow button until Network is highlighted, and then press OK.

3.Press the down arrow button until Wireless Radio is highlighted, and then press OK.

4.Press the down arrow button to highlight On or Off, and then press OK.

Print the wireless network test

The wireless network test performs a series of diagnostic tests to determine whether network setup is successful. If an issue is detected, a recommendation on how to correct the issue will be included on the printed report. You can print the wireless network test at any time.

1.Press Setup.

2.Press the down arrow button until Network is highlighted, and then press OK.

3.Press the down arrow button until Wireless Network Test is highlighted, and then press OK.

The Wireless Network Test prints.

Network setup

Manage your network settings

15

Image 17
Contents Basics Guide Hewlett-Packard Company notices Contents Set up the HP All-in-One on a wired Ethernet network Network setupTo connect the product to the network What you need for a wired networkConnect the HP All-in-One to the network Chapter Connect to an integrated wireless Wlan 802.11 network What you need for an integrated wireless Wlan 802.11 networkIf you do not see your network name in the list To connect the product with the Wireless Setup WizardSet up the HP All-in-One using an ad hoc wireless connection To create a network profile What you need for an ad hoc networkCreate a network profile for other operating systems To connect to a wireless ad hoc network Connect to a wireless ad hoc networkCommunication mode ad hoc Encryption enabled To install the Windows HP Photosmart Software Install the software for a network connectionConnect to additional computers on a network To change a USB connection to a wired Ethernet connectionThis runs the Wireless Setup Wizard Configure your firewall to work with HP productsAdvanced firewall information Manage your network settingsPrint network settings Turn the wireless radio on and off Restore network defaultsPrint the wireless network test Wireless Network Test printsHP All-in-One at a glance HP All-in-One overviewLabel Icon Name and Description Control panel featuresOnscreen Help Find more informationStart Here guide To load full-size paper Load paperHP Web site Chapter Avoid paper jams Print a photo on photo paper Make a copy Scan an imageTo print photos Press Print PhotosTo make a copy from the control panel Replace the ink cartridgesPress Start Copy Black or Start Copy Color to begin copying To replace the ink cartridgesReplace the ink cartridges One overview To uninstall and reinstall the software Uninstall and reinstall the softwareTroubleshooting common setup issues Setup troubleshooting Solution 1 Press the On button to turn on the product After setting up the product, it does not printSolution 2 Set your product as the default printer Solution 5 Load paper in the input trayWireless Network Test prints Network troubleshootingTo run the Network Diagnostic tool To check a wired Ethernet connectionMake sure the product is on the network To check a wireless connectionTo print the Network Configuration Page a. Press Setup Network Status To access the HP Photosmart C6300 All-in-One series homeMake sure the product is online and ready To restart the HP Network Device Support service Make sure the HP Network Devices Support service is runningClear paper jams To check the printer statusSupport process If you have a problem, follow these stepsInformation on ink cartridges and the printhead Regulatory notices Product specificationsSystem requirements Technical information WarrantyXHPERXUJ UDQDLV
Related manuals
Manual 16 pages 43.7 Kb Manual 331 pages 38.76 Kb