HP 300 manual Store fax now? 1=Yes 2=No, Or press Speed Dial and a two-digit code number

Do this:

8.Enter the fax number.

OR press Speed Dial and a two-digit code number.

OR press a One-Touch button.

9.Press Enter/Save to save the fax number you entered.

Using
these buttons:	For this display:

0	through	9	Enter fax number
			5554138

Enter/Save

Store fax now? 1=Yes 2=No

10.Press 1 to store the document in memory until the fax start time, or press 2 to load the document in the fax loading tray until the fax start time.

1

OR

2

Load document, then press START

OR

Load document, in fax tray

11. If you pressed 1 in step 10,	Start/Copy
load the document and press
Start/Copy. (If the message
"Memory full" displays,
leave the entire document in
the fax loading tray until the
start time.)

OR

If you pressed 2 in step 10, load the document and leave it there until the start time. You may remove the docu` ment if you need to send another fax or make copies; just replace it before the start time (shown on the bottom line of the display).

Storing . . .

Memory used: 40%

OR

Document loaded Fax at 1:00 AM

If you want to cancel a scheduled fax: Repeat steps 1 through 5, then press Right Arrow to display "Cancel Send," then press Enter/Save to cancel the scheduled fax.

2`8