HP N8400 manual Load originals, Place an original on the scanner glass

Page 13

Load originals

•Place an original on the scanner glass

•Load paper into the document feeder

Place an original on the scanner glass

Place items that do not meet the specifications for the automatic document feeder (ADF) directly onto the scanner glass.

Minimum size:

Maximum size:

Any size

215.9 mm x 355.6 mm (8.5 inches x 14 inches)

Place the original face down on the scanner glass, as indicated by the reference mark.

Load paper into the document feeder

The scanner document feeder is rated to process paper that meets the following specifications:

Minimum size:

Maximum size when long-page support is disabled:

Maximum size when long-page support is enabled:

Minimum weight:

Maximum weight:

148 mm x 148 mm (5.8 inches x 5.8 inches)

215.9mm x 355.6 mm (8.5 inches x 14 inches)

215.9mm x 863.6 mm (8.5 inches x 34 inches)

49 g/m2 (13 lb)

120 g/m2 (32 lb)

The paper capacity of the document feeder is 100 sheets of 75 g/m2 (20 lb) paper.

NOTE: HP does not recommend using the document feeder for photos, multipart forms, transparencies, or gum-backed pages.

CAUTION: Avoid placing items that have sharp edges, paper clips, staples, wet glue, correction fluid, or other substances in the scanner. Document pages should not be curled, wrinkled, or stuck together.

Load originals

11

Image 13

Contents HP Scanjet N8400 series Trademark credits Copyright and licenseContents Advanced technical features TroubleshootingWhat you can do with the scanner Scanner overviewScanner hardware Power Save buttonScanner front panel buttons Quick start buttonsScan Document To buttons Copy buttonsScanner software Scanner lamp settingHP Smart Document Scan Software HP Scanner Tools Utility HP Document Copy UtilityScan Progress Window Setup and Support Guide Where to get additional informationUser Guide Click View or print guidesLCD Reader AccessibilityControl of the scanner buttons HP Scanner Tools Utility helpBasic scanning steps Scan and CopyBasic copying steps Place an original on the scanner glass Load originalsLoad paper into the document feeder Scan from HP Smart Document Scan Software Scan from the scanner front panel buttonsScan with one button press Scan from other software programsSet up an HP Smart Document Scan Software profile Set up scan profilesChoose profiles for display on the scanner front panel Assign profiles to quick start buttonsClick Continue Import and export profiles HP Scanner Tools Utility Maintenance tab Care and maintenanceOrder maintenance and scanning supplies Clean the scanner glassMaintain the automatic document feeder ADF Clean the paper pathClean the ADF window Clean the feed roller Maintain the automatic document feeder ADF Chapter Replace the feed roller and separation pad Remove the automatic document feeder from the scannerChapter Scanner error messages TroubleshootingChapter Scanner does not start Scanner initialization or hardware problemsScanner has stopped working correctly Scanner operation problemsScanner will not turn on Scanner does not scan right away Scanner lamp stays onScanner scans only one side of a double-sided Scanned image is fuzzyVertical white stripes appear on the printed Scanned images are not straightScanner glass is dirty Scan files are too largeWrong profile is used when a quick start button is pressed An unexpected program opens when a button is pressedScanner buttons are not working correctly Buttons do not workPaper jamming, skewing, misfeeds, or multiple-page feeds Automatic document feeder ADF problemsPaper does not feed from the ADF Bottom of the scanned image is cut offAn item loaded in the ADF jams repeatedly Scanned images have streaks or scratchesClear jams from the ADF Clear a jam from the start of the paper pathChapter Clear a jam at the end of the paper path Remove a paper jam within the ADF Contact HP SupportLong pages Advanced technical featuresPage ADF Index