Use the copy features
Chapter 9
Make multiple copies of the same original
You can set the number of copies from the control panel of the HP
NOTE: For information on initiating copies from the software, see the software portion of the HP Photosmart Software Help.
To make multiple copies of an original from the control panel
1.Make sure you have paper loaded in the input tray.
2.Load your original print side down on the right front corner of the glass.
3.Press the Copies button to increase the number of copies. When you reach the maximum, the setting returns to 1 copy.
TIP: Use the software that you installed with the HP
of copies higher than supported from the control panel. When the number of copies is greater than 9, only the last digit of the number of copies is displayed on the control panel.
4.Press Start Copy Black or Start Copy Color.
In this example, the HP
Related topics
“Use the HP Photosmart software” on page 9
Make a borderless copy of a photo
For the best quality when copying a photo, load photo paper in the input tray.
TIP: You can optimize the quality of the color photos you print and copy with the HP
56 Use the copy features