Chapter 13
covering the ink nozzles, carefully remove the tape from the print cartridges. Do not touch the ink nozzles or the
1
2Plastic tape with pink pull tab (must be removed before installing)
3Ink nozzles under tape
Troubleshooting
Reinsert the print cartridges and verify that they are fully inserted and locked in place.
Cause: The contacts on the print cartridge are not touching the contacts in the print carriage.
Solution: Remove and then reinsert the print cartridges. Verify that they are fully inserted and locked in place.
Cause: The print cartridge or sensor is defective.
Solution: To find support and warranty information, go to the HP Web site at www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: You installed new print cartridges which might need alignment.
Solution: You must align the print cartridges to ensure excellent print quality.
If the alignment error persists and you cannot clear it, your print cartridge might be defective. Contact HP for support.
134 Troubleshooting