![](/images/new-backgrounds/1153073/153073101x1.webp)
Configure the device to send e-mail
Before you can send a document to
NOTE: You can also configure the
For more information on setting up a feature, solving a problem, or discovering how to use this device, go to www.hp.com/support/9250c.
Supported protocols
SMTP
●Simple Mail Transfer Protocol (SMTP) is a set of rules that define the interaction between programs that send and receive
●If you are using a LAN connection, contact your system administrator to obtain the IP address for your SMTP server. If you are connecting through a DSL connection, contact the service provider to obtain the SMTP server IP address.
LDAP
●Lightweight Directory Access Protocol (LDAP) is used to gain access to a database of information. When the device uses LDAP, it searches a global list of
●The device supports LDAP, but a connection to an LDAP server is not required in order for the device to be able to send to
NOTE: If you need to change the LDAP settings, you must change them by using the embedded Web server. For more information, see the Embedded Web Server User Guide on the device CD.
Configure e-mail server settings
Consult a network administrator or internet service provider (ISP) for the IP address or the name of the SMTP server. Or, find the IP address from the device control panel (touch Network Address). Then use the following procedures to manually configure and test the IP address.
Configure the SMTP gateway address
1.From the Home screen, touch Administration.
2.Touch Initial Setup.
3.Touch
ENWW | Configure the device to send |