HP 9250C Use the embedded Web server, Open the embedded Web server by using a network connection

Use the embedded Web server

NOTE: If you use the HP Digital Sending Software provided on the digital sender software CD, you must use the HP MFP DSS Configuration Utility to perform the functions below described in this section. See the HP Digital Sending Software Support Guide on the documentation CD for configuration instructions.

●View device control status information

●View and change the device control panel menu configuration

●View internal pages

●Receive notification of device events

●View and change network configuration

●View support content that is specific to the current state of the device

When the device is connected to the network, the embedded Web server is automatically available.

To use the embedded Web server, you must have Microsoft Internet Explorer 4 and later or Netscape Navigator 4 and later. The embedded Web server works when the device is connected to an IP-based network. The embedded Web server does not support IPX-based or AppleTalk printer connections. You do not need Internet access to open and use the embedded Web server.

Open the embedded Web server by using a network connection

1.In a supported Web browser on your computer, type the device IP address or host name in the address/URL field. To find the IP address or host name, either touch the Network Address button on the device control panel touchscreen or view the configuration page.

NOTE: After you open the URL, you can bookmark it so that you can return to it quickly in the future.

2.The embedded Web server has three tabs that contain settings and information about the device: the Information tab, the Settings tab, and the Networking tab. Click the tab that you want to view.

See Embedded Web server sections on page 54 for more information about each tab.