HP 9250C manual Upgrade the firmware

NOTE: The firmware update involves a change in the format of nonvolatile random-access memory (NVRAM). Any menu settings that are changed from the default settings might return to default settings and must be changed again if you want settings that are different from the defaults.

1.If you do not already have it, get the TCP/IP address of the digital sender from the EIO Jetdirect page. The HP Jetdirect page is the second page that you see when viewing the configuration page on the control panel.

NOTE: Before connecting to the digital sender, make sure that it is not in Sleep mode. Also make sure that any error messages are cleared from the control-panel display.

2.Open a command window on your computer.

3.Type: ftp <TCP/IP ADDRESS>. For example, if the TCP/IP address is 192.168.0.90, type ftp 192.168.0.90.

4.Press Enter on the keyboard.

5.When prompted for the user name, press Enter.

6.When prompted for the password, press Enter.

7.Type bin at the command prompt.

8.Press Enter. The message 200 Types set to I, Using binary mode to transfer files appears in the command window.

9.Type put <FILENAME>, where <FILENAME> is the path to the .RFU file that was downloaded from the Web. For example, type put C:\LJ\9250FW.RFU, and then press Enter.

NOTE: If the file name or path includes a space, you must enclose the file name or path in quotation marks. For example, type put "C:\MY DOCUMENTS\LJ\9250FW.RFU"

The following series of messages appears in the command window:

200 PORT command successful

150 Opening BINARY mode data connection

226 Ready

226 Processing Job

226 Transfer complete

Then, a message containing transfer-speed information appears.

10.The download process begins and the firmware is updated on the device. This can take about five minutes. Let the process finish without further interaction with the device or computer.

NOTE: The digital sender automatically restarts the firmware after processing the upgrade.

11.At the command prompt, type bye to exit the ftp command.

12.At the command prompt, type exit to return to the Windows interface.