Alerts − Page 1 of 4
As described earlier on Page 6, alerts may pop up on the screen during setup. To view alerts otherwise, press the alerts tab. Up to 10 alerts are stored for recall by the technician.
The left side of the main alert screen shows a list of each communicating device discovered in the system and includes model and serial number information. The up/down arrows allow you to scroll through the list of discovered devices. The selected device is shown in bold lettering.
On the right side of the alert screen, press view active alerts to list all active alerts for either SYSTEM ALERTS (lists alerts from all communi- cating devices) or a selected device. If there are no alerts, the display will show
The first alert will be displayed in the 7), in order of:
1.critical first (red icon),
2.service next (yellow icon).
If the information in the alert box exceeds the box size, press press for more to see the remaining information.
Press view cleared alerts to list previously active alerts that were cleared by the device or installer. Until at least one alert has been cleared by the device or the installer, the display will show
alerts that require service".
alert description
ALERT 1 of 5
(Service) Alert Code − (0) (Thermostat) reports:
active alerts
remind later
System Devices
SYSTEM ALERTS
HP XP19−060−230−06 5809K00015
use the arrows to select a device
view active
alerts
(Replace Filter 1)
Latest Occurrence
(04/03/09)
(08:45 PM)
(4)Occurrences press for more
clear
back | next alert |
AIR HANDLER CBX32MV−60 5809K00020
THERMOSTAT 49W95 A109K00139
view cleared
alerts
alerts diagnostics EXIT
Figure 27. Device alert
alerts diagnostics EXIT
Figure 26. System Devices alerts
506052−01 11/09 | Page 18 |