Installer setup − Page 7 of 8
Indoor air quality controls
An example of installing UV Light is shown in figure 10, Page 9.
To turn on humidification or dehumidification controls, in addition to the setup described on Page 9, work from either the setup tab or the equipment tab to get to the adjustment screen (figure 15). Use the arrows to highlight the SYSTEM selection. Press edit.
A long list of features are listed on the right of the next screen (see figure 16). Use the arrows to locate Humidification Control Mode and/or De- humidification Control Mode. Press edit.
Depending on the type of equipment installed, the lists of options may be different than those shown in figure 17. In order for either or both of these controls to display, the selected option must be other than
setuptests
system devices
XP19−060−230−06
5809K00015
AIR HANDLER CBX32MV−60 5809K00020
THERMOSTAT 49W95 A109K00139
SYSTEM 49W95 A109K00139
equipment HELP
(to adjust a device, highlight it, then press edit)
about
edit
reset ALL
back | next step |
Only".
Figure 15. Accessing the SYSTEM adjustment screen
506052−01 11/09 | Page 12 |