Lennox International Inc P506052-01, 2P1109 setup guide AIR Handler

Parameter Name:	Default		Parameter Value Setting		Increment
AIR HANDLER
Equipment Name	Air Handler		(Typewriter input screen)
Electric Heating Airflow					5CFM
	nnnn CFM
Low Cooling Airflow		NOTE: CFM Default and Values Settings are dependent on the tonnage of the unit			5CFM
	SEE NOTE −.
High Cooling Airflow					5CFM
Cooling Airflow Profile	1	1: No Delays,		3: ON: 82%/7.5min; OFF: No delays
		2: ON: No delays; OFF: 45 sec delay		4: ON: 50%/30s,82%/7.5min; OFF:50%/30s
Low Heating Airflow					5CFM
High Heating Airflow	nnnn CFM				5CFM
		NOTE: CFM Default and Values Settings are dependent on the tonnage of the unit
Continuous Indoor Blower Airflow					10CFM
	SEE NOTE −.
Humidification Airflow					10CFM
Dehumidification Airflow	70%		60 to 80% (percentage of reduction of High Cooling Airflow)		1%
Heating Indoor Blower OFF Delay	10 sec		0 to 10 Seconds		1 sec
Heating Indoor Blower ON Delay	0 sec		0 to 5 Seconds		1 sec
Cooling Indoor Blower OFF Delay	0 sec		0 to 30 Seconds		2 sec
Cooling Indoor Blower ON Delay	2 sec		0 to 10 Seconds		1 sec
HP Indoor Blower OFF Delay	45 sec		0 to 60 Seconds		5 sec
HP Indoor Blower ON Delay	0 sec		0 to 30 Seconds		5 sec
THERMOSTAT
Equipment Name			(Typewriter input screen)
Temp Reading Calibration	0ºF			−5ºF to 5ºF	1ºF
Humidity Reading Calibration	0%			−10 to 10%	1%RH
OUTDOOR EQUIPMENT
Equipment Name (HP and AC)	Outdoor Unit		(Typewriter input screen = up to 35 characters in string)
Compressor Short Cycle Delay (HP and AC)	300 Seconds		60 to 300 Seconds		60 Sec
Compressor Shift Delay On/Off (HP only)	On			On, Off
Defrost Termination Temp (HP only)	50ºF			50 to 100ºF	10ºF

Page 27 icomfortt Touch Screen 7−Day Programmable Thermostat