Tests − Page 1 of 1
After the tests have been started, the screen will describe which test is running (see figure 20). After concluding that the results are the desired results for any test, press next (if using TEST ALL) to proceed to the next test or done (if running a single test).
TEST ALL example
CURRENT TEST: Blower
Check Blower Operation
cancel next
single test example
CURRENT TEST: Blower
Check Blower Operation
cancel done
Figure 20. Typical tests results screens
After pressing done, the Testing finished" screen will appear (see figure 21). At this point, use the EXIT tab (if you are finished with all setup), or use diagnostics tab (to analyze the system), or use equipment tab (if you wish to make any changes to device details).
setup | tests | equipment | HELP |
The Testing Process is Finished
press the ’tests’ tab to run more tests.
press the ’EXIT’ tab to start normal operation.
alerts diagnosticsEXIT
Figure 21. Testing finished screen
Page 15 | icomfortt Touch Screen 7−Day Programmable Thermostat |