Raypak 240692 manual Basics, Important Safety Instructions

Page 4

BASICS

Contents

 

Item

Quantity

 

Y–Series Boiler Control, Installed on Boiler(s)

As Ordered

 

Outdoor Temperature Sensor Assembly

1

 

Water Temperature Sensor Assembly

1

 

Optional Equipment

As Ordered

 

 

 

Check packaging for damaged or missing components.

 

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT NOTICE: These instructions are intended for use by qualified personnel who are specifically trained and experienced in the installation of this type of equipment and related system components. Installation and service personnel may be required by some states to be licensed. If your state requires certification, be sure your contractor bears the appropriate license. Only qualified persons shall attempt to repair this equipment. Repair must be according to these instructions.

WARNING: Improper installation, adjustment, alteration, service or maintenance may damage the equipment, create a hazard resulting in asphyxiation, explosion, fire, electric shock, personal injury or property damage, and will void the warranty.

CAUTION: MORE THAN ONE (1) SUPPLY SOURCE. THIS APPLIANCE HAS PROVISIONS TO BE CONNECTED TO MORE THAN ONE (1) SUPPLY SOURCE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DISCONNECT ALL SUCH CONNECTIONS BEFORE SERVICING.

CAUTION: RISK OF ELECTRIC SHOCK. MORE THAN ONE (1) DISCONNECT SWITCH MAY BE REQUIRED TO DE-ENERGIZE THE EQUIPMENT BEFORE SERVICING.

4

Image 4
Contents Electronic Boiler Sequencer & Outdoor Reset Controller Installation and Operating Instructions Series Electronic Boiler ControlTable of Contents Important Safety Instructions BasicsIntroduction Optional ConfigurationsConcept of Operation Control Features Standard Indicator LightsInstallation and Mounting Mechanical InstallationElectrical Installation Install Conduit AS AppropriateWiring Power Source to Controller CheckyourpowersourceAIR Temperature Sensor Outdoor AIR Temperature SensorHydronic Installations Water Temperature Sensor InstallationTypical Water Sensor Domestic HOT Water Installations Domestic HOT Water Application Setup ProcedurePool Heating Installations Field Wiring Single-Stage On/Off BoilersInstallation Verification Procedure Power TestControl Familiarization Sequence of Operation Manual OverrideSeries Electronic Boiler Control Module Indicator Lights Reset Ratio Control FunctionsReset Ratio Chart Pump TURN-OFF DelayStage TURN-ON Delay Outdoor Cutoff TemperatureControl Band Outdoor Cutoff DeadbandMaximum Water Temperature SET PointCircuit Board Interior Jumper & Switches AutoSlave DHWManual LEAD-LAG Output OverrideNight Setback Option Optional ControlsDigital Display Option Replacement Parts List Call OUT DescriptionSystem Setting Entered on Date System START-UP SettingsInterior Jumper & Switch Settings Troubleshooting Guide OFFLimited Warranty Litho in U.S.A