Multiquip MP200SDLSM, MP200DLTE, MP150SDLTS, MP150SDLTE, MP200DLSM, MP200DLTS, MP150SDLSM Battery

Page 12

RULES FOR SAFE OPERATION

Battery

The battery contains acids that can cause injury to the eyes and skin. To avoid eye irritation, always wear safety glasses or face shielding. Use well-insulated gloves when picking up the battery. Use the following guidelines when handling the battery.

■DO NOT drop the battery. Any impact to the battery may cause it to explode.

■DO NOT expose the battery to open flames, sparks, lit cigarettes etc. The battery contains combustible gases and liquids. If these gases and liquids come in contact with a flame or spark an explosion can occur.

■ALWAYS keep the battery charged. If the battery is not charged, a buildup of combustible gas will occur.

■ALWAYS keep battery cables in good working condition. Repair or replace all worn cables.

■ALWAYS disconnect the negative battery terminal before performing service on the equipment.

■Inadequate battery connections may cause poor starting of the trowel, and create other malfunctions.

■ALWAYS recharge the battery in a vented air environment to avoid risk of a dangerous concentration of combustible gases.

■DO NOT charge battery if frozen. Battery can explode. When frozen, warm battery to at least 61°F (16°C).

■If the battery liquid (dilute sulfuric acid) comes in contact with clothing or skin, rinse skin or clothing immediately with plenty of water.

■If the battery liquid (dilute sulfuric acid) comes in contact with your eyes, rinse eyes immediately with plenty of water, then contact the nearest doctor or hospital and seek medical attention.

PAGE 12 —DRY PRIME PUMP — OPERATION MANUAL — REV. #3 (10/06/08)

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DRY Prime Pump Proposition 65WARNING Reporting Safety Defects Reporting Safety DefectsTraining Checklist Training ChecklistDaily PRE-OPERATION Checklist Table of Contents DRY Prime Pump Operation and Parts Manual REV. #3 10/06/08 Safety Message Alert Symbols For Your Safety and the Safety of OthersSafety Message Alert Symbols Always wear approved respiratory protectionRules for Safe Operation Operating the pumpRules for Safe Operation Add 1000 lbs kg. toBattery Pump Dimensions Pump DimensionsTrailer Dimensions Trailer DimensionsSpecifications Pump SpecificationsSpecifications Engine General Information ImpellerPump Components Rear Fuel Tank Drain Plugs Remove either plug to drain fuelPump Components Engine. See for detailed specifications Engine ComponentsSolenoid Type alternatorVoltmeter Gauge Indicates the battery charge Engine has been in useOil Pressure Meter Monitors engine oil pressure Engine Hour Meter Displays the number of hoursPumping Application Pump ApplicationSee Trailer Safety Guidelines Towing ApplicationSetup Suction and discharge hoses arePump will not be able to begin Inspection Tighten fuel tank cap securely after fillingOperation To the Start positionLonger suction hoses will require Pump Storage Engine Shut-DownMaintenance Pump Engine MaintenanceDry Pump Vacuum Test Maintenance Engine Imsa Fuel Filter Fuel Water Separator FilterFuel Tank Maintenance Trailer Manually Adjusting the BrakesTrailer Brakes Surge BrakesBreakaway Battery Breakaway SwitchBrakes must be synchronized Hydraulic Brack ActuatorAdjustable Channel Wheel Hub Adjustment„ Install a new cotter pin through the spindle nut and axle Wheel Bearings HubsTrailer Maintenance Torsion SuspensionTrailer Safety Guidelines Common Causes for Loss of TrailerTrailer Towing Guidelines Always use lower gears for climbing and descending gradesTrailer Safety Guidelines Never drive faster than what is safeDriving Conditions Coupling to the Tow VehicleReporting Safety Defects AdministratorNew Jersey Avenue S.E Washington, DC Inoperable Brakes, Lights or MirrorsTrailer VIN Tag Vehicle VIN TagElectrical Connector Safety ChainsTow Vehicle Suspension SystemCouplerTypes „ Ball Hitch Coupler „ Pintle Eye CouplerBall Hitch Coupler Before coupling the tow vehicle toOverloading can damage More than 1 inch Attaching Safety Chain „ Attach the safety chains so that theyBreakaway Brake System Breakaway Cable Surge Brake SystemElectric BrakeTesting Connecting Trailer LightsUncoupling the Ball Hitch Pintle Hitch Coupler Pintle Coupler and Pintle HookTire Safety Unsafe Tires, Lug Nuts or WheelsImproper tire pressure causes an unstable trailer and can Determining Load Limit of Trailer Tire and Loading InformationStep Determining Load Limit of Tow Vehicle StepTire Fundamentals Uniform Tire Quality Grading Standards Utqgs P indicates the tire is for passenger vehiclesTire Safety Tips Load RangeTire Repair Replacing Worn or Damaged TiresWheel Rims Wheels, Bearings and Lug NutsLug Nut Torque Requirements Start all wheel lug nuts by handTrailer Lightswiring Diagram Lights and SignalsNameplate and Decals Tire and Loading InformationTroubleshooting Pump Priming or Pump Flow ProblemsTroubleshooting Engine Engine TroubleshootingTroubleshooting Engine DipstickTroubleshooting Trailer Brakes Surge Brake TroubleshootingDRY Prime Pump Operation and Parts Manual REV. #3 10/06/08 HERE’S HOW to GET Help Your Local Dealer is

MP200SDLTE, P200DLST, MP150SDLSM, MP200DLTS, MP200DLSM specifications

The Multiquip MP series of vibratory plate compactors, including models MP200DLTS, MP200DLTE, MP150SDLTE, P200DLST, and MP200SDLTE, are engineered for exceptional performance in compaction tasks across a variety of applications. These models are vital for contractors seeking efficiency, power, and reliability in the field.

The MP200DLTS and MP200DLTE models are particularly noteworthy for their robust design and versatility. Both are equipped with a powerful engine that delivers high centrifugal force, allowing operators to achieve effective compaction on different soil types. Their durable construction ensures longevity, even in demanding environments. The MP200DLTS features a dual-direction capability for increased maneuverability, while the MP200DLTE is designed for heavier-duty tasks and larger areas.

For users looking for a slightly more compact solution, the MP150SDLTE is a standout choice. This model combines portability with power, making it ideal for smaller jobs or confined spaces. It excels in providing precise compaction where larger equipment may struggle, while still maintaining high performance standards.

The P200DLST model offers enhanced features such as a heavy-duty baseplate designed to offer increased stability and excellent surface contact. This contributes to better results when compacting asphalt or granular materials, making it a preferred choice for road construction and repair projects.

Finally, the MP200SDLTE boasts advanced technology that enriches its operational capabilities. With an integrated vibration control system, users can adjust the compaction force on the fly, allowing for tailored performance based on specific job requirements. Its ergonomic handle design enhances user comfort, reducing fatigue during extended use.

Safety is also a priority in these models, with features such as protective guards and emergency stop buttons, ensuring that operators can work confidently. The overall combination of power, versatility, and innovative features makes the Multiquip MP series an essential tool for contractors in both construction and landscaping sectors.

In summary, whether it’s the heavy-duty capabilities of the MP200 series or the compact efficiency of the MP150SDLTE, Multiquip's offerings deliver outstanding performance, making them ideal for various compaction tasks. The robust engineering and thoughtful features provide users with the reliability needed in today’s competitive marketplace.
Top Page Image Contents