Multiquip MP150SDLTS, MP200DLTE, MP150SDLTE, MP200DLSM Rules for Safe Operation, Operating the pump

Page 10

DANGER

Read this manual!

Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

The following safety guidelines should always be used when operating the Dry Prime Pump:

GENERAL SAFETY

■DO NOT operate or service this equipment before reading this entire manual.

■This equipment should not be operated by persons under 18 years of age.

■NEVER operate this equipment without proper protective clothing, shatterproof glasses, steel-toed boots and other protective devices required by the job.

■NEVER operate this equipment when not

feeling well due to fatigue, illness or taking medicine.

■NEVER operate this equipment under the influence of drugs or alcohol.

■ALWAYS wear proper respiratory (mask), hearing and eye protection equipment when

operating the pump.

■Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

■Manufacture does not assume responsibility for any accident due to equipment modifications.

■NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

RULES FOR SAFE OPERATION

■NEVER touch the hot exhaust

manifold, muffler or cylinder. Allow these parts to cool before servicing engine or pump.

■High Temperatures – Allow the engine to cool before adding fuel or performing service and maintenance

functions. Contact with hot! components can cause serious burns.

■The air-cooled diesel engine of this pump requires an adequate free flow of cooling air. NEVER operate the pump in any enclosed or narrow area where free flow of the air is restricted. If the air flow is restricted it will

cause serious damage to the pump or engine and may cause injury to people. Remember the engine gives off DEADLY carbon monoxide gas.

■ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

■ALWAYS use extreme caution when working with flammable liquids. When refueling, stop the engine and allow it to cool. DO NOT smoke around or near the machine. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot engine.

■NEVER operate the pump in an explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death.

■Topping-off to filler port is dangerous, as it tends to spill fuel.

■Stop the engine when leaving the pump unattended.

■Block the unit when leaving or when using on a slope.

PAGE 10 —DRY PRIME PUMP — OPERATION MANUAL — REV. #3 (10/06/08)

Page 9 Page 11
Image 10
Page 9 Page 11
Contents DRY Prime Pump Proposition 65WARNING Reporting Safety Defects Reporting Safety DefectsTraining Checklist Training ChecklistDaily PRE-OPERATION Checklist Table of Contents DRY Prime Pump Operation and Parts Manual REV. #3 10/06/08 Safety Message Alert Symbols For Your Safety and the Safety of OthersSafety Message Alert Symbols Always wear approved respiratory protectionRules for Safe Operation Operating the pumpRules for Safe Operation Add 1000 lbs kg. toBattery Pump Dimensions Pump DimensionsTrailer Dimensions Trailer DimensionsSpecifications Pump SpecificationsSpecifications Engine General Information ImpellerPump Components Rear Fuel Tank Drain Plugs Remove either plug to drain fuelPump Components Solenoid Engine. See for detailed specificationsEngine Components Type alternatorOil Pressure Meter Monitors engine oil pressure Voltmeter Gauge Indicates the battery chargeEngine has been in use Engine Hour Meter Displays the number of hoursPumping Application Pump ApplicationSee Trailer Safety Guidelines Towing ApplicationSuction and discharge hoses are SetupPump will not be able to begin Inspection Tighten fuel tank cap securely after fillingTo the Start position OperationLonger suction hoses will require Pump Storage Engine Shut-DownEngine Maintenance Maintenance PumpDry Pump Vacuum Test Maintenance Engine Fuel Water Separator Filter Imsa Fuel FilterFuel Tank Trailer Brakes Maintenance TrailerManually Adjusting the Brakes Surge BrakesBrakes must be synchronized Breakaway BatteryBreakaway Switch Hydraulic Brack Actuator„ Install a new cotter pin through the spindle nut and axle Adjustable ChannelWheel Hub Adjustment Wheel Bearings HubsTrailer Maintenance Torsion SuspensionTrailer Towing Guidelines Trailer Safety GuidelinesCommon Causes for Loss of Trailer Always use lower gears for climbing and descending gradesDriving Conditions Trailer Safety GuidelinesNever drive faster than what is safe Coupling to the Tow VehicleNew Jersey Avenue S.E Washington, DC Reporting Safety DefectsAdministrator Inoperable Brakes, Lights or MirrorsTrailer VIN Tag Vehicle VIN TagTow Vehicle Electrical ConnectorSafety Chains Suspension SystemBall Hitch Coupler CouplerTypes„ Ball Hitch Coupler „ Pintle Eye Coupler Before coupling the tow vehicle toOverloading can damage More than 1 inch Breakaway Brake System Attaching Safety Chain„ Attach the safety chains so that they Breakaway Cable Surge Brake SystemConnecting Trailer Lights Electric BrakeTestingUncoupling the Ball Hitch Pintle Hitch Coupler Pintle Coupler and Pintle HookUnsafe Tires, Lug Nuts or Wheels Tire SafetyImproper tire pressure causes an unstable trailer and can Determining Load Limit of Trailer Tire and Loading InformationDetermining Load Limit of Tow Vehicle Step StepTire Fundamentals Uniform Tire Quality Grading Standards Utqgs P indicates the tire is for passenger vehiclesTire Repair Tire Safety TipsLoad Range Replacing Worn or Damaged TiresLug Nut Torque Requirements Wheel RimsWheels, Bearings and Lug Nuts Start all wheel lug nuts by handTrailer Lightswiring Diagram Lights and SignalsNameplate and Decals Tire and Loading InformationTroubleshooting Pump Priming or Pump Flow ProblemsTroubleshooting Engine Engine TroubleshootingTroubleshooting Engine DipstickTroubleshooting Trailer Brakes Surge Brake TroubleshootingDRY Prime Pump Operation and Parts Manual REV. #3 10/06/08 HERE’S HOW to GET Help Your Local Dealer is

MP200SDLTE, P200DLST, MP150SDLSM, MP200DLTS, MP200DLSM specifications

The Multiquip MP series of vibratory plate compactors, including models MP200DLTS, MP200DLTE, MP150SDLTE, P200DLST, and MP200SDLTE, are engineered for exceptional performance in compaction tasks across a variety of applications. These models are vital for contractors seeking efficiency, power, and reliability in the field.

The MP200DLTS and MP200DLTE models are particularly noteworthy for their robust design and versatility. Both are equipped with a powerful engine that delivers high centrifugal force, allowing operators to achieve effective compaction on different soil types. Their durable construction ensures longevity, even in demanding environments. The MP200DLTS features a dual-direction capability for increased maneuverability, while the MP200DLTE is designed for heavier-duty tasks and larger areas.

For users looking for a slightly more compact solution, the MP150SDLTE is a standout choice. This model combines portability with power, making it ideal for smaller jobs or confined spaces. It excels in providing precise compaction where larger equipment may struggle, while still maintaining high performance standards.

The P200DLST model offers enhanced features such as a heavy-duty baseplate designed to offer increased stability and excellent surface contact. This contributes to better results when compacting asphalt or granular materials, making it a preferred choice for road construction and repair projects.

Finally, the MP200SDLTE boasts advanced technology that enriches its operational capabilities. With an integrated vibration control system, users can adjust the compaction force on the fly, allowing for tailored performance based on specific job requirements. Its ergonomic handle design enhances user comfort, reducing fatigue during extended use.

Safety is also a priority in these models, with features such as protective guards and emergency stop buttons, ensuring that operators can work confidently. The overall combination of power, versatility, and innovative features makes the Multiquip MP series an essential tool for contractors in both construction and landscaping sectors.

In summary, whether it’s the heavy-duty capabilities of the MP200 series or the compact efficiency of the MP150SDLTE, Multiquip's offerings deliver outstanding performance, making them ideal for various compaction tasks. The robust engineering and thoughtful features provide users with the reliability needed in today’s competitive marketplace.
Top Page Image Contents