SPECTRA III
LANGUAGEENGLISH
<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
AUTO SHARPNESS
Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture.
There are two settings: |
|
ON (default) | The camera automatically maintains a normal sharpness mode. |
OFF | The sharpness of the picture is set manually by programming the |
| SHARPNESS LEVEL. Sharpness level settings range from |
DOME SETTINGS
<CAMERA>
<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>
BACK
EXIT
CAMERA
AUTO FOCUS | ON |
ZOOM LIMIT | X128 |
ZOOM SPEED | MEDIUM |
LOW LIGHT LIMIT | 2 |
|
|
<ADVANCED SETTINGS> |
|
BACK |
|
EXIT |
|
AUTO WHITE BALANCE
This feature automatically processes the viewed image to retain color balance over a color temperature range. The default setting for auto white balance is ON.
R GAIN | Adjusts the picture output in the red range. As you change the |
| value, you will see the color change on your monitor. |
B GAIN | Adjusts the picture output in the blue range. As you change the |
| value, you will see the color change on your monitor. |
ADVANCED SETTINGS
SHUTTER SPEED | AUTO |
AGC LIMIT | 25 |
AUTO IRIS | AUTO |
AUTO IRIS LEVEL | 66 |
AUTO IRIS PEAK | 8 |
AUTO SHARPNESS | ON |
SHARPNESS LEVEL | 26 |
AUTO WHITE BALANCE | ON |
R GAIN | 482 |
B GAIN | 678 |
BACKLIGHT COMP | OFF |
VIDEO LEVEL | HIGH |
BACK |
|
EXIT |
|
*This setting only applies to Pressurized Spectra III dome systems with software version 1.25 or higher.
20 |
|