WELCOME
Thank you for purchasing Pelco’s premier integrated dome system, Spectra III. Your new system features a high resolution, color camera/optics package with LowLight™ technology and programmable dome drive software.
This manual is designed to be a reference tool for the operation and programming of your system. Inside you will find information about Spectra III’s features and commands, as well as a detailed menu tree.
Getting Started
You will need to install your dome system before using this manual. Refer to the installation packet supplied with the back box for installation instructions.
Once installed apply power to the Spectra III dome system. The system will start a configuration sequence. When configuration is done, the following information is displayed:
Pelco Spectra III
*Version X.XX
D Address: 1
P Address: 2
Comm 2400, N, 8, 1
CONFIGURE DONE
This information will remain on the monitor until dome operation begins.
Refer to the following pages to learn how to operate and program your dome system.
*Pressurized Spectra III dome systems require software version 1.25 or higher to monitor temperature, pressure, and dew point.
7 |