Pelco DD53TC16-X manual Line Sync, Dome synchronizes to an internal clock

Line Sync

SPECTRA III

LANGUAGEENGLISH

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>

BACK

EXIT

LINE SYNC

LINE SYNC	ON
LINE SYNC PHASE	0
BACK
EXIT

Line sync refers to a programmable function that allows you to synchronize all cameras within a matrix system.

NOTE: Spectra III automatically senses V-sync input. No line sync setup is required for Pelco control systems that provide a V-sync signal.

For matrix systems that do not output V-sync, there are two settings for line synchronization:

ON (default)	Adjusts the phase of the line sync to synchronize input power.
	LINE SYNC PHASE settings range from 0-359 degrees.
OFF	The dome synchronizes to an internal clock.

*This setting only applies to Pressurized Spectra III dome systems with software version 1.25 or higher.

Quick Programming Guide

(See page 11)

C2446M-E (11/05) 27