Pelco DD53TC16-X manual SOFTWARE/LANGUAGE File Upload, Upload Icon

Page 37

SOFTWARE/LANGUAGE FILE UPLOAD

The RJ-45 data port of the dome drive allows access for on-site setup, testing, and uploading of revised operating software and language files. A Pelco field service tool is required to perform these operations. Field service tools include Pelco’s remote monitor kit (IPS-RMK), remote data port box (IPS-RDPE-2), and remote monitor cable (IPS-CABLE).

For instructions on how to upload revised operating software and language files refer to the Installation/Operation manual supplied with the field service tool.

NOTE: Only perform software uploads when necessary. Software uploads do not need to be performed if the dome system is operating properly.

UPLOAD ICON

During a software/language file upload, an icon will appear on the monitor to indicate data is being transferred to the Spectra dome system (refer to the figure below). The default setting for data transmission is 115.2 KB per second. Noisy and long-run connections will slow the transmission rate.

Upload Icon

C2446M-E (11/05)

37

Image 37

Contents Spectra III Series Page 16X LowLight Color Technology C2446M-E 11/05 Contents Regulatory Notices Welcome Configure DoneGetting Started Pelco Spectra Version Address Comm 2400, N, 8HOW to Operate Your Dome System CM6700/CM6800 Accessing Main Menu PresetNET300/NET350/NET4001A Preset Function Following presets are reserved for special functionsC2446M-E 11/05 Quick Programming Guide LanguageSee System Information Display Setup Label Position Camera Dome SettingsShutter Speed Advanced Camera SettingsAGC Limit Numeric ValueAuto Iris Level Auto IrisAuto Iris Peak Auto White Balance Auto SharpnessGain Video Level Backlight Compensation BLCNormal There are two auto flip modes On default Motion SettingsAuto Flip Proportional PANPreset None default No actionPark Time Park ActionLimit Stops Scan SpeedManual ScanAzimuth Zero Power UP Action Power UpDome synchronizes to an internal clock Line SyncFollowing presets are predefined for specific functions PresetsPreset Action Determined zero reference pointPatterns To edit a zone label ZonesTitle Text Repeat AlertSystem Condition Alert Message ACK Action Reset AlertActivate AUX Current Reading Clear Password Reset Camera RESET, Cycle POWER, RebootCycle Camera Power Reboot SystemUpload Icon SOFTWARE/LANGUAGE File UploadNtsc SpecificationsPAL Radio and Television Interference Regulatory NoticesPage Page ISO9001

Related manuals

Manual 42 pages 59.32 Kb