Power Up
SPECTRA III
LANGUAGEENGLISH
<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
DOME SETTINGS
<CAMERA>
<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>
BACK
EXIT
POWER UP
POWER UP ACTION | AUTO |
BACK
EXIT
POWER UP ACTION
This setting defines a specific activity (scan, preset, pattern) to be performed in the event the power to the dome is cycled.
The following settings are available:
NONE | No action. |
AUTO SCAN | Dome starts auto scan operation. |
RANDOM SCAN | Dome starts random scan operation. |
FRAME SCAN | Dome starts frame scan operation. |
PRESET 1 | Dome goes to preset 1. |
PRESET 8 | Dome goes to preset 8. |
PATTERN 1 | Dome runs pattern 1. |
*This setting only applies to Pressurized Spectra III dome systems with software version 1.25 or higher.
26 |
|