Presets
SPECTRA III
LANGUAGEENGLISH
<SYSTEM INFORMATION> <DISPLAY SETUP>
<DOME SETTINGS> ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
The Spectra III dome system has 99 preset positions. Each of the
The following presets are predefined for specific functions:
Preset | Action |
33 | Flip command. Pans the dome drive 180 degrees. |
EXIT
DOME SETTINGS
<CAMERA>
<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>
BACK
EXIT
34 | Pan zero command. Directs the dome drive to the factory- |
| determined zero reference point. |
Reserved. | |
Manual limit stops. | |
Scan limit stops. | |
94 | Reserved. |
95 | Select main programming menu. |
96 | Stop a scan. |
97 | Random scanning. |
98 | Frame scanning. |
99 | Start auto scanning. |
Use the following steps to program a preset.
1.Select the preset number:
PRESETS
PRESET NUMBER | 1 |
* * * PRESET NOT DEFINED * * *
<EDIT PRESET LABEL> <EDIT PRESET SCENE>
a.Use the joystick to position the cursor beside PRESET NUMBER. Press Iris Open. The cursor moves to the right.
b.Move the joystick up or down to view selections. Press Iris Open to enter selection.
<CLEAR PRESET>
BACK
EXIT
2.Edit the preset label:
a. Use the joystick to position the cursor beside EDIT PRESET LABEL.
REFERENCE INFORMATION | - |
AZIMUTH | |
ELEVATION | - |
ZOOM RATIO | - |
*This setting only applies to Pressurized Spectra III dome systems with software version 1.25 or higher.
b.Press Iris Open. The following appears on the monitor:
LABEL FOR PRESET
PRESET NUMBER
1234567890 | OK |
ABCDEFGHIJ | CANCEL |
KLMNOPQRST |
|
SPACE | |
abcdefghij | BACKSPACE |
klmnopqrst |
|
uvwxyz#&:* |
|
c.Use the joystick to position the cursor beside a character. Press Iris Open to enter selection. To clear a character, position the cursor beside BACKSPACE, and then press Iris Open.
d.When label is completed, move the cursor to OK. Press Iris Open to return to the Preset menu.
3.Edit the preset scene:
a.Use the joystick to position the cursor beside EDIT PRESET SCENE.
b.Press Iris Open.
c.Follow the directions displayed on the monitor.
28 |
|