HOW TO OPERATE YOUR DOME SYSTEM
Operation | How to Control |
Pan and Tilt | Move joystick or press the direction keys left/right and up/down. |
Zoom Far | To zoom far, do the following: |
| 1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit. |
| 2. Release the button or joystick for one second. |
| 3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the |
| picture you want or reach the digital zoom1 limit. |
Zoom Wide | Press the Zoom Wide button or turn the joystick counterclockwise. |
Scanning |
|
Stop Scan | Preset 96 |
Random Scan | Preset 97 |
Frame Scan | Preset 98 |
Auto Scan | Preset 99 |
Presets | Refer to the documentation supplied with the control system. |
Patterns2 | Refer to the documentation supplied with the control system. |
Zones | Refer to the Zones section and to the documentation supplied with the control system. |
Alarms | Refer to the Alarms section in this manual. |
Auto Flip | Turn on or off in the programming menu. Refer to the Auto Flip section in this manual. |
1Digital zoom magnifies the image electronically and the picture may appear pixilated. The larger the digital zoom limit the greater the reduction in resolution.
2The dome cannot do digital zoom in a pattern. Optical zoom will operate in a pattern.
8 |
|