Attach Base Escutcheon, Attach Temperature Knob

Lower shell

Use your hand to center the ring escutcheon as the temperature knob is threaded onto valve stem.

LARGER HOLE AT TOP

TEMPERATURE EXTENSION

FLOW EXTENSION

ATTACH BASE ESCUTCHEON:

1.Turn off main hot and cold water supply to valve.

2.Turn temperature extension near top of valve body counter-clockwiseuntil it stops (it may already be in the full counter-clockwise position).

3.Turn white flow extension near bottom of valve body clockwise until it stops (it may already be in the full clockwise position).

4.Place the base escutcheon (4) over the hole

in shower wall with larger hole in

Turn until "9" is at 12 o'clock position

Temperature extension turned fully counter-clockwise

ATTACH TEMPERATURE KNOB:

1.Confirm that the temperature extension near top of valve body is rotated fully counter- clockwise.

2.Align the temperature knob to the temperature extension with the number “9” on the grip ring turned upward to the 12 o’clock position.

3.Move the temperature knob (6) towards the temperature extension until the internal splines (projections on the inner diameter) in the temperature knob start to engage the external splines on the temperature extension.

the base escutcheon surrounding the top threaded extension from the valve. The base escutcheon will be correctly oriented when the word “MOEN” is right side up.

5.Place the flat side of the two ring escutcheons (5) against the base escutcheon (4): one ring escutcheon over the temperature extension and one ring escutcheon over the white flow extension. At this point, the ring escutcheons and base escutcheon will be hanging from the threaded extensions on the valve body.

4.After splines start to

engage, turn the lower shell of the temperature knob clockwise several turns while

5 holding the rubber grip to prevent it from turning. This turning will thread the internal threads in the temperature

4knob onto the threads on the

valve body. Continue turning the lower shell (you may release the rubber grip) until

the lower shell compresses the ring escutcheon (5)

against the base escutcheon (4). It is helpful to pull the lower shell towards you away from the shower wall as you turn it to keep the knob from disassembling. Note that as the temperature knob nears the base escutcheon, the base escutcheon and ring escutcheon will have to be shifted upwards so that the ring escutcheon is centered on the lower shell and the black plastic part extending from the bottom of the temperature knob fits within the hole in the base escutcheon. Tighten the lower shell hand-tight only. Verify that the “9” is still at the 12 o’clock position. This completes the attachment of the

temperature knob.	4

ATTACH BASE ESCUTCHEON:

ATTACH TEMPERATURE KNOB:

temperature knob.