Using the Quiet function
You can reduce the noise generated from an indoor unit.
Press the Quiet button on the remote controller while the air conditioner is operating in Cool/Heat mode.
Quiet indicator appears on the remote controller display.
The indoor unit will operate more quietly.
Cancel Press the Quiet button once again.
• If using a multi system, this function will work only when the Quiet function is set on all operated indoor units.
Using the Auto Clean function
Auto clean function will prevent from growing mold by eliminating the moisture inside of the indoor unit. Your indoor unit evaporates the moisture inside of the unit. Activate this function to provide you with more clean and healthier air.
Press the Auto Clean button.
When the air conditioner is turned off,
The Auto clean indicator on the indoor unit display appears and the Auto cleaning
function runs.
When the air conditioner is turned on,
After stopping the air conditioner operation , the Auto clean indicator on the indoor
unit display appears and the Auto cleaning function runs.
Auto Cleaning time can vary, depending on the previously used mode.
Auto(cool), Cool, Dry mode : approximately 30 minutes.
Auto(heat), Heat, Fan mode : approximately 15 minutes.
Cancel Press the Auto Clean button once again.
• When the air conditioner is turned on, the Auto clean function runs after
stopping the air conditioner operation.
16