7.Separate the hinge shaft by using hex wrench fi rst. Unscrew the bolt to remove the hinge riser and switch the side of the hinge shaft and the hinge riser.
Hinge shaft
Hinge riser
8mm Bolt
8.Attach the hinge on the bottom left side of the refrigerator where bolts were previously removed in step 6.
Screw the bolts that were removed on the bottom right side of the refrigerator for the future usage.
11.Remove the hinge and the grommet from the refrigerator door.
Detach the right side hinge cover and pull the wires out of the hinge cover.
Hinge cover 
Grommet 
Be careful not to damage the electrical CAUTION wires when removing the hinge cover.
12.Use wrench to separate the hinge shaft and then fl ip the hinge and reattach the hinge shaft.
10mm
10mm
9.Remove the screws on the bottom left and right side of the refrigerator door.
Switch the side of the door stopper from right to the left. Hinge riser should be switched as well.
Hinge riser | Hinge riser | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10.Remove the wire cover on top of the refrigerator door to switch the side of the wires.
13.Reassemble the hinge on the refrigerator door by reversing the step 11.
Make sure to use left side hinge cover (which can be found underneath the removed plastic cover from step 2) and remove the grommet.
After reassembling the hinge, wire and the hinge cover, switch the side from right to the left.
Grommet
14.After switching the hinge, close it with the wire cover on the top of refrigerator door.
“Cover Wire Door R” can be found in the packaging
8_ setting up
13. 7. 2. 11:04 |