Samsung AR18HVSDEWKNMG, AR24HVSDEWKXMG manual Setting the Off timer, English-19, Er03mti, Button

Page 19

Setting the On/Off timer

Setting the Off timer

When the air conditioner is on;

Remote controller display

1.Press the Timer button to select (Off)..

-- (Off) indicator will keep blinking and you can set the time..

2.Press the button to set the time..

-- You can set the time in half hour unit from 30 minutes (0..5 on the display) ~ 3 hours and hour unit from 3~24 hours..

-- Time can be set from minimum 30 minutes to maximum 24 hours..

3.Press the SET button to complete the Off timer setting..

-- (Off) indicator and the set time of the timer will be displayed on the remote controller display and the Timer indicator ( ) will be displayed on the indoor unit display..

-- Off timer setting will be cancelled if you don't press the SET button within 10 seconds after setting the time.. Therefore, check for the (Off) indicator on the remote controller display and the Timer indicator () on the indoor unit display..

ffPress the Timer button select (Off) press the or button

Cancel set the timer topress the SET button.. ffPress the Power () button..

• Off timer may not work depending on the On/Off status of the indoor unit and the On/Off status of the indicator on the remote controller display.

Only the latest setting timer will be applied between the On Timer/Off

Timer andOff timer functions.

After setting the timer, the set time will be displayed for 3 seconds before it disappears.

If Timer function is used in Heating mode, Air conditioner work into former mode. (AR✴✴HV✴✴ series)

er03mti

Combining On Timer and Off Timer

 

 

 

 

When the air conditioner is off

When the air conditioner is on

 

 

 

 

 

 

 

When set time on On timer is shorter than Off timer

When set time on On timer is longer than Off timer

Ex) On timer : 3 hours, Off timer : 5 hours

Ex) On timer : 3 hours, Off timer : 1 hour

 

- The air conditioner will turn on after 3 hours from the

- The air conditioner will turn off after 1 hour from the

 

moment you have set the timer and the air conditioner will

moment you have set the timer and turn on after 2 hours

 

remain on for 2 hours and then turn off automatically..

from the moment it was turned off..

 

 

 

 

 

 

 

 

 

 

 

Set time for the On timer and the Off timer should be different from each other..

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When the On timer and the Off timer is set, setting can be cancelled by pressing the Power

 

button..

 

 

 

 

 

English-19

MG_BETTER_INV_A3050_IB&IM_EN_DB68-05191A_UX.indd 19

2/17/2015 2:47:41 PM

Image 19
Contents DB68-05191A-02 Air ConditionerFeatures of your new air conditioner Contents English-4 Safety precautions01epPr aration English-5English-6 For UsingEnglish-7 English-8 Do not place objects or devices under the indoor unitEnglish-9 For CleaningOperation ranges Checking before useEnglish-10 English-11 Technical SpecificationsDisplay Wi-Fi indicator Timer / Auto Clean indicatorChecking the name of the parts Main partsRemote controller buttons Checking the remote controllerEnglish-13 Inserting the batteries Remote controller displayLow Battery warning Storing the remote controllerBasic function Press the button to set the desired fan speed Press the button to adjust the temperature English-16 Vertical air flow Horizontal air flow Adjusting the air flow directionRemote controller displayRemote controller display English-17FfPress the Timer button select On press the or button  Setting the On/Off timerSetting the On timer When the air conditioner is offButton Setting the Off timerEnglish-19 Er03mtiMode Additional options available in modeEnglish-20 Press the Options button When the air conditioner is operating in Cool modeStep cooling function English-21English-22 Using the Fast functionUsing the Comfort function When the air conditioner is operating in Cool/Heat modeEnglish-23 Using the Single user functionMake the Quiet indicator blink and press the SET button Using the Quiet functionEnglish-24 Make the indicator blink and press the SET button Using the Virus Doctor functionWhen the air conditioner is operating When the air conditioner is not in operationMake the Clean indicator blink and press the SET button Checking the power consumptionUsing the Auto clean function Lighting in Auto clean modeEnglish-27 Setting the Beep soundResetting the Filter clean reminder Setting the Display optionEnglish-28 Using the Smart A/C applicationEnglish-29 Cleaning the air conditionerCleaning the indoor unit Cleaning the outdoor unit heat exchangerRemove the Air filter from the main body Cleaning the Air filterRemoving the Air filter English-30English-31 Reassembling the Air filterTop of the Air filter into the main body.. ➀ English-32 Maintaining the air conditionerEnglish-33 TroubleshootingTemperature Adjustment is notHeard when refrigerant flow movement changes. It is normal Button or disconnect the power plug/switchCheck the Drains have been cleared Regular Maintenance Error is indicatedEnglish-35 General information07stin llan atio Indoor unit Choosing the installation locationInstalling the unit Power supply line, fuse or circuit breakerReduce noise and vibration Where sulfide gas existsOutdoor Unit English-37 Figure Description When installing more than 1 outdoor unitWhen the air outlet is towards the wall English-38English-39 AccessoriesAccessories in the indoor unit case Accessories in the outdoor unit caseTools for test operations Fixing the installation plateOptional accessories Tools required for installation General ToolsEnglish-41 Assembling the hanger screwEnglish-42 This QR code for detail video of indoor unit installationRemoving the screws Removing the Cover panel Before mounting the indoor unitEnglish-43 Assembling the Cover panel After mounting the indoor unitEnglish-44 Connecting the assembly cableCable specification Connecting the cableEach wire is labeled with the corresponding terminal number Extend the assembly cable if necessaryEnglish-45 Torque English-46Smooth the cut edges Cut off the remaining foam insulationUnscrew the caps at the end of each pipe Evacuating the indoor unitCutting or extending the pipe English-47Flare nut English-48Correct Inclined CrackedEnglish-49 Drain hose installationCheck for leakage on both side of the drain outlet Change the direction only when it is necessaryChanging direction of the drain hose English-50Outdoor unit Indoor unit Evacuating the connected pipesEnglish-51 Outer TorqueIf you use a pipe longer than 5 m Adding RefrigerantEnglish-52 Cylinder with siphonEnglish-53 Performing the gas leak tests660 340 Outdoor unit installed on the wall by rackFixing the outdoor unit in place English-54English-55 Smart Install modeOff / Blinking / On English-56English-57 Final check and trial operationEnglish-58 Packing and unpacking guideAtio After tube contraction work is completed, wrap it with How to connect your extended power cablesEnglish-59 Apply heat to the contraction tube to contract it021-8255 CE Questions or COMMENTS?
Related manuals
Manual 22 pages 11.55 Kb