Using the Virus Doctor function
This function will produce positive ions and supply them into the airflow.
When the air conditioner is operating;
Remote controller display
1.Press the Options button..
2.Press the 
, 
or Options button until (
) indicator starts to blink..
3.Press the SET button to set the Virus Doctor function..
)(
) indicator will be displayed on the remote controller display and Virus Doctor function will begin..
Cancel | ffPress the Options button Press the | , | or Options button to | ||
| make the ( ) indicator blink and press the SET button.. | ||||
|
|
|
|
|
|
• Virus Doctor lamp will turn on when the Virus Doctor function turns on, and it will turn off when the function is cancelled..
•Virus Doctor function can be selected while Auto/Cool/Dry/Fan/Heat mode is on..
•Set temperature can be adjusted.
•There will not be much difference on energy consumption and operating noise when the Virus Doctor function is selected additionally while the other function is on.
•When the Virus Doctor function is selected with other operation mode, pressing the Power button will stop the operation.
s n 04 optio
When the air conditioner is not in operation;
1. Press the Options button..
2. When the (
) indicator blinks, press the SET button to select the Virus Doctor function..
)(
) indicator will be displayed on the remote controller display and Virus Doctor function will begin..
ffPress the Options button to make the (
) indicator blink and press
Cancel the SET button..
ffPress the Power(
) button..
English-25
2/17/2015 2:48:05 PM 