Samsung AR24HVSDEWKNMG Checking the power consumption, Using the Auto clean function, English-26

Checking the power consumption

This function will display the amount of electricity consumed by operating the air conditioner.

When the air conditioner is operating;

1. Press the Settings button..

2. Press the ,or Setting button until (Usage) indicator starts to blink..

3. Press the SET button to check the power consumption..

-- 3 seconds after setting power consumption checking function, (Usage) indicator on the remote controller will disappear..

-- Indoor unit will display the amount of Power consumption for few seconds and then return to usual status by displaying the set indoor temperature.

-- Power consumption will be calculated from the moment the air conditioner is turned on and calculated value will be reset when the air conditioner turns off.

-- 0.1 is the default value of the electricity consumption and 99 is the maximum value. Unit is in kWh.

• When the air conditioner is not operating, power consumption will not be displayed on the indoor unit display.

Indoor unit display

Using the Auto clean function

Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with clean air.

When the air conditioner is operating;

Indoor unit display

1.Press the Settings button..

2.Press the ,or Setting button until (Clean) indicator starts to blink..

3.Press the SET button to set the Auto clean function..

-- 3 seconds after setting Auto clean function, (Clean) indicator on the remote

controller display will disappear and Auto clean ( ), Timer () indicator will turn on the indoor unit display.. Auto clean function will be activated after the air conditioner stops operating..

-- Duration of the Auto clean function can be different depending on the previous operation mode used.

Auto(cool), Cool, Dry mode : 30 minutes.

Auto(heat), Heat, Fan mode : 15 minutes.

Cancel	ffPress the Setting button Press the	,	or Setting button to
	make the (Clean) indicator blink and press the SET button..

• When the operation mode is set during Auto clean function is activated, the air conditioner will operate in chosen operation mode and the Auto clean function will be re-activated when the operation stops.

•During the auto clean function, indoor fan will continue to run and air flow blade will remain open to expel ambient air.

• lighting in Auto clean mode.

English-26

MG_BETTER_INV_A3050_IB&IM_EN_DB68-05191A_UX.indd 26

2/17/2015 2:48:07 PM