Samsung AR24HVSDEWKXMG, AR18HVSDEWKXMG Mode, English-20, Additional options available in mode

Page 20

mode

For a comfortable sleep, the air conditioner will operate in 3 stages in order of Fall asleep Sound sleep Wake up stage.. When the air conditioner is operating in Cool/Heat mode;

1. Press the Timer button to select ()..

-- () indicator will keep blinking and you can set the time..

2. Press the button to set the time..

-- You can set the time in half hour unit from 30 minutes (0..5 on the display) ~ 3 hours and hour unit from 3~12 hours..

-- Time can be set from minimum 30 minutes to maximum 12 hours..

-- Default time setting for the

mode is 8 hours..

3. Press the SET button to complete themode setting..

-- (

) indicator and the set time of the

mode will be displayed on

the remote controller display..

 

 

 

-- Timer indicator ( ) will be displayed on the indoor unit display..

 

--

mode setting will be cancelled if you don't press the SET button within

10 seconds after setting the time.. Therefore, check for the (

) indicator on the

remote controller display and the Timer indicator ( ) on the indoor unit display..

Cancel

ffPress the Timer button select (

) press the

or

button

 

set the timer to

press the SET button..

 

 

Remote controller display

Additional options available inmode

You can adjust the set temperature by 1 °C within the range of 16 °C~30 °C.

Fan speed will be adjusted automatically according to themode.

However, If you selectmode while heating operation is on, you can adjust fan speed.

When themode is on.

In Cool mode: Air flow direction will be adjusted automatically.

In Heat mode: Adjusting air flow direction is available.

Temperature and fan speed change inmode

•• Fall asleep: Eases you into sleep by dropping the temperature..

•• Sound sleep: Relaxes your body and raises your temperature slightly..

•• Wake up: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed..

• Recommended set temperature is between 25 °C ~ 27 °C for cooling and 21 ˚C~23 ˚C for heating.

• If the set temperature is too low, you may feel cold during sleep or catch a cold..

Optimal operation hour of mode is 8 hours.. Therefore, if the time is set too short or long, you may not feel as comfortable as you would expect..

If the mode is set over 5 hours, Wake up stage will begin when 1 hour is remaining in the operation time and the air conditioner will stop automatically..

When the On timer and the function is set simultaneously, the air conditioner will only apply the function that was set later..

English-20

MG_BETTER_INV_A3050_IB&IM_EN_DB68-05191A_UX.indd 20

2/17/2015 2:47:44 PM

Image 20
Contents Air Conditioner DB68-05191A-02Features of your new air conditioner Contents Safety precautions English-4English-5 01epPr arationFor Using English-6English-7 Do not place objects or devices under the indoor unit English-8For Cleaning English-9English-10 Checking before useOperation ranges Technical Specifications English-11Wi-Fi indicator Timer / Auto Clean indicator Checking the name of the partsMain parts DisplayEnglish-13 Checking the remote controllerRemote controller buttons Remote controller display Low Battery warningStoring the remote controller Inserting the batteriesBasic function English-16 Press the button to adjust the temperaturePress the button to set the desired fan speed Adjusting the air flow direction Remote controller displayRemote controller display English-17 Vertical air flow Horizontal air flowSetting the On/Off timer Setting the On timerWhen the air conditioner is off FfPress the Timer button select On press the or button Setting the Off timer English-19Er03mti ButtonEnglish-20 Additional options available in modeMode When the air conditioner is operating in Cool mode Step cooling functionEnglish-21 Press the Options buttonUsing the Fast function Using the Comfort functionWhen the air conditioner is operating in Cool/Heat mode English-22Using the Single user function English-23English-24 Using the Quiet functionMake the Quiet indicator blink and press the SET button Using the Virus Doctor function When the air conditioner is operatingWhen the air conditioner is not in operation Make the indicator blink and press the SET buttonChecking the power consumption Using the Auto clean functionLighting in Auto clean mode Make the Clean indicator blink and press the SET buttonSetting the Beep sound Resetting the Filter clean reminderSetting the Display option English-27Using the Smart A/C application English-28Cleaning the air conditioner Cleaning the indoor unitCleaning the outdoor unit heat exchanger English-29Cleaning the Air filter Removing the Air filterEnglish-30 Remove the Air filter from the main bodyTop of the Air filter into the main body.. ➀ Reassembling the Air filterEnglish-31 Maintaining the air conditioner English-32Troubleshooting TemperatureAdjustment is not English-33Button or disconnect the power plug/switch Check the Drains have been cleared Regular MaintenanceError is indicated Heard when refrigerant flow movement changes. It is normal07stin llan atio General informationEnglish-35 Choosing the installation location Installing the unitPower supply line, fuse or circuit breaker Indoor unitWhere sulfide gas exists Outdoor UnitEnglish-37 Reduce noise and vibrationWhen installing more than 1 outdoor unit When the air outlet is towards the wallEnglish-38  Figure DescriptionAccessories Accessories in the indoor unit caseAccessories in the outdoor unit case English-39Fixing the installation plate Optional accessoriesTools required for installation General Tools Tools for test operationsAssembling the hanger screw English-41This QR code for detail video of indoor unit installation Removing the screwsRemoving the Cover panel Before mounting the indoor unit English-42Assembling the Cover panel After mounting the indoor unit English-43Connecting the assembly cable Cable specificationConnecting the cable English-44English-45 Extend the assembly cable if necessaryEach wire is labeled with the corresponding terminal number English-46 Smooth the cut edgesCut off the remaining foam insulation TorqueEvacuating the indoor unit Cutting or extending the pipeEnglish-47 Unscrew the caps at the end of each pipeEnglish-48 Correct InclinedCracked Flare nutDrain hose installation English-49Change the direction only when it is necessary Changing direction of the drain hoseEnglish-50 Check for leakage on both side of the drain outletEvacuating the connected pipes English-51Outer Torque Outdoor unit Indoor unitAdding Refrigerant English-52Cylinder with siphon If you use a pipe longer than 5 mPerforming the gas leak tests English-53Outdoor unit installed on the wall by rack Fixing the outdoor unit in placeEnglish-54 660 340Smart Install mode English-55English-56 Off / Blinking / OnFinal check and trial operation English-57Packing and unpacking guide English-58How to connect your extended power cables English-59Apply heat to the contraction tube to contract it Atio After tube contraction work is completed, wrap it withQuestions or COMMENTS? 021-8255 CE
Related manuals
Manual 22 pages 11.55 Kb