Samsung AF28FSSDADFNFA manual Cleaning the Zero filter, Dry the filter in a ventilated area

Page 31

Cleaning the air conditioner

Cleaning the Zero filter

Zero filter traps small dust particles within the air. It is washable and it can be used semi-permanently.

Remove the lower Full HD filter. Grasp the handle on the Zero filter and remove it by pulling it in the direction of the arrow shown in the figure.

Soak the filter in the water and shake it up and down for few times.

ffDo not disassemble the Zero filter when cleaning it.

fIfthe accumulated dust is heavy, soak the filter in water mixed with detergent and shake it in water for 30 minutes until it is cleaned.

Push the Zero filter in the direction of the arrow and make sure it is fixed in correct position. Put the lower Full HD filter back.

Dry the filter in a ventilated area.

ffPut the filters vertically for 12~24 hours when drying (Drying time can be shorter depending on the condition)

ffDo not dry the Zero filter in direct sunlight. It may get deformed.

CAUTION

• Be careful with the sharp rear surface of the Zero filter. You may cut in your hands.

• Clean the Zero filter every 3 months. (Based on 8 hours of use per day.) Cleaning term may differ depending on

NOTE the usage and environmental conditions.

30

칠레향 FAC MEMORY 냉난방_IBIM_EN_03892A(5).indd 30

2014-03-12 오전 9:33:09

Image 31
Contents This product is RoHS compliant Questions or COMMENTS?Thank you for purchasing this Samsung product Air ConditionerApplicable to Affssd only Features of your new air conditionerSeasons of effective cleaning Smart sensorContents Injury or property damage Safety precautionsImportant safety symbols and precautions Injury or deathFfThis may result in electric shock or fire For Power Supply Warning For Using FfThis may result in electric shock or burns Do not operate the appliance with wet hands Do not place objects or devices under the indoor unitDo not drink the water from the air conditioner Do not clean the inside of the air conditioner by yourself For CleaningMake sure that curtain does not block the air inlet Cool mode, set the appropriate desired temperatureUse extra heating apparatus during heat mode Checking before useFunctions available for each model Auxiliary power switchAuxiliary power switch NFB, ELB, etc Operation rangesHeating capacity Indoor unit Checking the name of the partsDischarge cool air Buttons on control panel DisplayNumber of air outlets is different depending on the models Button one more time Stop Press the PowerOperation with control panel Fan speed of each air outlet will differRemote controller buttons Checking the remote controllerInserting the batteries Remote controller displayBattery changing time Storing the remote controllerBasic operation Solomode Remarks Press the button to set the operation modePress the button to adjust the desired temperature Press the button to turn on the air conditionerPress the button to select desired air flow direction Press Button on the remote controller in the Cool/Heat modeTurbo operation Air flow directionGoodsleep operation When the air conditioner is on and in cool modeTemperature and fan speed changes in goodsleep mode Additional options available in On timer mode Setting the On/Off timerGoodsleep functions Your air conditioner will turn on Preset time on On timer is longer than Off timerAir conditioner will turn on after 3 hours Lighting function Press the button during Cool modeTo adjust the lighting level of an indoor unit Smart sensor operationQuiet operation Auto clean operationBe careful with the sharp edges on the outdoor unit Cleaning the air conditionerCleaning the indoor unit Cleaning the outdoor unit heat exchangerPull out the Full HD filter in the arrow direction Cleaning the Full HD filterRemove dust with a vacuum cleaner or running water Full HD Filter filters the big dust of incoming airFfDo not disassemble the Zero filter when cleaning it Cleaning the Zero filterDry the filter in a ventilated area Troubleshooting Check if your batteries are depleted Controller after setting the timeClean the Zero filter and Full HD Filter if they are dirty SpeedNot worry about fire with this Error is indicatedContact a service center Conditioner, push the Zero filter to the endOpen Source Announcement Installation parts Safety precautions Tools for test operations Choosing the installation locationRequired tools General toolsInstallation space for floor type indoor unit Indoor/outdoor unit installation diagramPiping length for indoor/outdoor unit installation Outdoor unit Fixing outdoor unitTo make sure water is drained properly Connecting the outdoor unit drain hoseInstallation accessories AccessoriesIndoor unit accessories Outdoor unit accessoriesFfDrill a hole with diameter of 60~65mm towards the outside Connecting pipesInstallation procedure Drilling a hole and fixing the indoor unitFfFlare length FfFlare processFfIncorrectly flared pipes DiameterD FfTightening of connection partsFfPipe insulation Indoor Use finishing tape wind up the refrigerant pipeConnection with wire-concealed piping Connecting drain hoseFix the drain hose tightly to prevent any water leakage Electrical work Wiring standardConnecting procedure Indoor power Indoor/outdoor unit power cableKgfcm 25~40 Safety information on outdoor unit power supplyType of outdoor unit power supply TorqueFfItems to prepare How to connect your extended power cablesApply heat to the contraction tube to contract it Vacuuming pipe Vacuum pumpFfVacuuming air conditioner Outer Tightening torque Performing leak testTest part for indoor unit Nm = 10 kgfcmCharging refrigerant Installing the earth wireCharge the refrigerant depending on the pipe length Disconnect the pipe Check and test operation
Related manuals
Manual 56 pages 43.72 Kb Manual 64 pages 24.82 Kb