Required tools, General tools | Samsung AF28FSSDADFNFA specs

Required tools

General tools

①Vacuum pump	②Torque wrench	③Pipe cutter
④Reamer	⑤Pipe bender	⑥Spirit level
⑦Screw driver	⑧Spanner	⑨Drill
⑩L wrench	⑪Measuring tape

Tools for test operations

①Thermometer

②Resistance meter

③Electroscope

Choosing the installation location

Indoor unit

ffInstall the unit at a place close to the wall facing the outside as it is necessary to perform piing connection with the outdoor unit.

-- It is effective to install the unit at the place where air flow is not blocked and the cool air can be distributed throughout the room.

ffInstall the unit at a place where there is no obstacle against the wind around the air intake and air outlet. ffAvoid a place near the door which is frequently used by people.

ffAvoid a place exposed to direct sunlight. (If it is unavoidable, install a sunshade). -- Surface of the product may get discolored.

❋❋Install it on even ground.

•Make sure there is no abnormal operation or noise generation.

•If installed on uneven ground, water may overflow.

Outdoor unit

ffAvoid a place exposed to direct sunlight. (If it is unavoidable, install a sunshade). ffA place free from the risk of combustible gas leakage.

ffA place which can bear the weight of the unit.

ffA place which can bear the fixing strength of the outdoor unit. ffAvoid a place exposed to oil (including machine oil) ffAvoid a saline place.

ffAvoid a place exposed to sulfide gas (hot spring zone).

-- When installing the unit at such special environmental conditions, it may cause trouble to the product. When it is unavoidable, special maintenance is required.

ffA place where discharged air and noise of the outdoor unit does not disturb the neighborhood.

-- Take extra care not to cause any inconvenience to your neighbors when installing the unit on the borderline with your neighborhood.

ffA place where strong wind does not head against the air outlet of the outdoor unit.

-- If a strong wind heads directly against the air outlet at the time of cool operation, a safety device can be operated.

❋❋Do not install the outdoor unit on a unstable places (such as rooftop). If installation is unavoidable, make sure that you fixed the unit firmly. Avoid places where strong wind or storm can possibly knock down the product (such as seashore or place with frequent storm)

ENGLISH

칠레향 FAC MEMORY 냉난방_IBIM_EN_03892A(5).indd 37

2014-03-12 오전 9:33:10