Indoor/outdoor unit installation diagram
Connecting the outdoor unit drain hose
ffPush the drain plug into the drain hose connection part as far as possible.
ffPush the drain hose into the drain plug as far as possible and check | Drain hose | |
to make sure water is drained properly. | connection part | |
| • Water may leak if the drain hose is not connected properly. |
|
CAUTION | Therefore, check for water leakage after the installation. |
|
|
|
• Frost may form during heating operation. Make sure to check for proper drainage in defrost operation.
• Do not install on the place where bottom part of the outdoor unit is at lower level than the drain hose.
• When installing the drain hose for draining the outdoor unit condensation of the cooling/heating product, make sure to install it so that it allows natural draining.
• When fixing the product, make sure that the product is level.
Bottom part of the outdoor unit
Drain plug
Drain hose connection part
Outdoor | Indoor |
| Pipe |
| Drain hose |
40
칠레향 FAC MEMORY 냉난방_IBIM_EN_03892A(5).indd 40 |